TROUBLESHOOTING

■When playing back a source encoded with DTS

SYMPTOM

CAUSE

REMEDY

Refer to

page

 

 

 

 

 

 

 

A loud hissing noise is

The player which plays back the source is not

The player must be connected to a digital audio

14

heard when playing back

connected to a digital audio signal input

signal input terminal of this unit besides the

 

a source encoded with

terminal of this unit.

analog audio signal terminal connections.

 

DTS.

 

 

 

The input mode is set to ANALOG on this unit.

Set a proper input mode to turn on the built-in

23

 

 

 

DTS decoder.

 

 

 

 

 

A percussive noise is

If the input mode is set to AUTO, depending on

Set the input mode of the currently selected

23

heard when playing back

some sources, there may be a noise heard while

input source to DTS.

 

a source encoded with

this unit is identifying the format of the input

 

 

DTS.

signal.

 

 

 

 

 

 

No sound is heard when

The built-in DTS decoder does not function

Set the player’s digital volume control at the

—

playing back a source

because the player has a digital volume control

maximum, neutral or ineffective position.

 

encoded with DTS, even

and it is set at a position other than

 

 

if the input mode is set

“maximum,” “neutral” or “ineffective.”

 

 

to AUTO on this unit.

 

 

 

 

 

 

 

No sound is heard when

A source encoded with DTS cannot be recorded

 

—

playing back an MD or

on an MD or DAT.

 

 

DAT on which has been

 

 

 

recorded a source

 

 

 

encoded with DTS.

 

 

 

 

 

 

 

No sound is heard when

In the AUTO mode, the DTS-decoding mode

Set the input mode to AUTO again.

24

playing back a source

cannot be automatically changed to the normal

 

 

(CD, etc.) even if the

(PCM) digital signal input mode.

 

 

currently selected input

 

 

 

mode is AUTO.

 

 

 

Notes

•It is necessary to use a DTS decoder to play back a source encoded with DTS, so the player which plays back the source must be connected to a digital audio input terminal of this unit in the way described in this manual. If this connection is not made or only a D-to-A converter is being used without using a DTS decoder, only a loud hissing noise will be heard when you play back the source.

•The “t” indicator will flash when the input mode is set to AUTO and a search or skip operation is performed while playing back a source encoded with DTS. If this status continues for 30 or more seconds, the unit will automatically switch from DTS-decoding mode to PCM digital signal input mode and the “ t” indicator will go out.

APPENDIX

English

53