CONNECTIONS

Connecting an Audio Component

Turntable

OUTPUT GND

LR

(U.S.A. model)

L

R

L R

L R

L R

OUTPUT

LINE OUT

LINE IN

CD player

Tape deck or

 

MD recorder

PREPARATION

Analog signal

Signal flow

Be sure to connect the right channel (R), left channel (L), input (IN) and output (OUT) properly.

■PHONO terminals

These terminals are used to connect a turntable with an MM or high-output MC cartridge. If you have a turntable with a low-output MC cartridge, use an inline boosting transformer or MC head amplifier when connecting to these terminals.

y

Connecting the ground (earth) wire of the turntable to the GND terminal will normally minimize hum, but in some cases, better results may be obtained with the ground wire disconnected.

English

13