Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha RX-V596 ■DTS, ■AUTO, ■ANALOG, ■Switching the input mode

1 67

Download 67 pages, 3.99 Mb

Input Mode (for the DVD/LD, TV/ digital TV and cable TV/satellite tuner sources)

This unit allows you to switch the input mode for sources that send both digital and analog signals to this unit. The AUTO, DTS and ANALOG input modes are provided.

When you turn on the power of this unit, the input mode for the DVD/LD source is always set to AUTO and for TV/ digital TV or cable TV/satellite tuner source is set according to “TV INPUT” and “CBL INPUT” on the SET MENU. (Refer to page 38 for details.)

■AUTO

In this mode, the input signal is selected in the following order of priority:

1.Digital signal encoded with Dolby Digital or DTS

2.Normal digital signal (PCM)

3.Analog signal (ANALOG)

Note

•If digital signals are input from both the OPTICAL and COAXIAL terminals, the digital signal from the COAXIAL terminal is selected.

■DTS

In this mode, only a digital signal encoded with DTS is selected, even if other signals are being input at the same time.

■ANALOG

In this mode, only an analog signal is selected, even if a digital signal is being input at the same time. Select this mode when you want to use an analog signal instead of a digital signal.

PLAYING A SOURCE

■Switching the input mode

Press INPUT MODE (or the input selector button that you have pressed to select the input source on the remote control) repeatedly until the desired input mode is shown on the display.

or

Front panel	Remote control

Notes

• Set the input mode to AUTO to play a DVD/LD source encoded	BASIC
players in the following situation: The input mode is set to	BASIC
with Dolby Digital.
• The sound output may be interrupted for some LD and DVD	OPERATION
	OPERATION

AUTO. A search is performed while playing the disc encoded with Dolby Digital or DTS, and then disc playing is restored. The sound output is interrupted for a moment because the digital signal was selected again.

• The input mode cannot be changed for the CD, TUNER, TAPE/ MD, VCR, PHONO and VIDEO AUX sources because only analog signals are used for these.

• The current input mode appears on the display when the DVD/ LD, TV/digital TV or cable TV/satellite tuner source is selected, or the input mode is changed.

English

23

Contents

Page SAFETY INSTRUCTIONS FCC INFORMATION (for US customers only) We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT FEATURESCONTENTS GETTING STARTED Checking the Package Contents Control Battery Replacement Using the Remote Control CONTROLS AND FUNCTIONS Front Panel Page Display Remote Control Description of the Numeric Buttons ■When selecting an input source ■When selecting a preset station number SPEAKER SETUP Speakers to Be Used Speaker Placement CONNECTIONS Before Connecting Components Connecting the Antennas ■AM loop antenna (included) ■Connecting the AM loop antenna ■Outdoor AM antenna ■Ground (GND terminal) Connecting an Audio Component Connecting a Video Component ■VIDEO terminals (composite) ■VIDEO AUX terminals (on the front panel) Connecting to an External Decoder Connecting the Speakers ■Speaker cables ■Connecting to the MAIN SPEAKERS terminals ■Connecting to the REAR and CENTER SPEAKERS terminals ■Connecting to an external amplifier IMPEDANCE SELECTOR Switch Connecting the Power Supply Cords ADJUSTING THE SPEAKER BALANCE Before You Start Adjusting Using the Test Tone Page PLAYING A SOURCE ■To mute the sound ■When you have finished using this unit ■BGV (background video) function ■AUTO ■DTS ■ANALOG ■Switching the input mode ■Notes on playing a source encoded with DTS ■Notes on playing an LD source ■Notes on the digital signal DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT Selecting a DSP Program Canceling the Sound Effect (turning off the effect speakers) TUNING Automatic Tuning Manual Tuning Automatic Preset Tuning (for FM stations only) Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE SOUND FIELD PROGRAM Page ■For Hi-Fiaudio sources CINEMA DSP: Dolby Surround + DSP/Dolby Digital + DSP/DTS + DSP ■Dolby Pro Logic + 2 digital sound fields ■Dolby Digital or DTS + 3 digital sound fields SET MENU Description of Each Item 5. MAIN LVL 6.D.D. LFE (Adjusting the output level of the LFE channel for Dolby Digital) 7.D-RANGE(Adjusting the dynamic range) 8.DTS LFE (Adjusting the output level of the LFE channel for DTS) 9.CNTR DELAY (Adjusting the delay of the sound from the center speaker) 10.MEM. GUARD (Locking the settings) DELAY TIME AND SPEAKER OUTPUT LEVELS Delay Time Sound Output Level of the Center Right Rear and Left Rear Speakers and Subwoofer Adjusting Method SLEEP TIMER Setting the SLEEP Timer Canceling the Selected SLEEP Timer PRESET REMOTE CONTROL Selector Dial Commonly used buttons in any position of the selector dial Controlling the Components Connected to This Unit Description of Each Position ■CD position ■DVD/LD position ■DVD MENU position ■VCR position ■CBL/SAT position ■TV position Advanced Information ■Returning to the factory-setcodes TROUBLESHOOTING Page ■ Tuner ■Remote control ■ Others ■When playing back a source encoded with DTS SPECIFICATIONS GLOSSARY INDEX LIST OF MANUFACTURER’S CODES LISTES DES CODES FABRICANT