Selecting the SPEAKER system
Because one or two speaker systems (as main speakers) can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.
SPEAKERS
A B
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.
BALANCE
l | 0 | l |
2 |
| 2 |
3 |
| 3 |
4 |
| 4 |
L 5 |
| 5 R |
Note
This control is effective only for the sound from the main speakers.
Adjusting the BASS and TREBLE controls
BASS |
| TREBLE | ||||
l | 0 | l |
| l | 0 | l |
|
|
| ||||
2 |
|
| 2 | 2 |
| 2 |
3 |
|
| 3 | 3 |
| 3 |
4 |
|
| 4 | 4 |
| 4 |
5 |
| 5 |
| 5 |
| 5 |
BASS : Turn this clockwise to increase (or counter- clockwise to decrease) the low frequency response.
TREBLE : Turn this clockwise to increase (or counter- clockwise to decrease) the high frequency response.
Note
These controls are effective only for the sound from the main speakers.
|
| English |
Using the BASS EXTENSION switch |
| |
|
| |
|
|
|
|
|
|
You can boost bass frequency response by setting this switch to the “ON” position. This switch is effective only on the sound from the main speakers.
BASS | TON | BASS | |
EXTENSION | |||
EXTENSION BYPA | |||
| |||
ON | OFF | ON | |
| |||
Using the TONE BYPASS switch
RX-V692 only
Press this switch to revert instantly to the flat states of the BASS and TREBLE controls without changing the setting of these controls.
ASS TONE
ENSION BYPASS
ON 
OFF 
25
