MAKING A NEW MACRO
A new macro can be programmed onto any preset macro key in place of preset functions. (See page 41 to know what keys are preset macro keys.) You can make as many as 13 new macro keys. A macro key can learn as many as seven functions of other keys.
Note
If you store a continuous command such as lowering of volume level, it will become a short command when it is carried out as a part of macro.
1
TRANSMIT
/LEARN
CLEAR LEARN MACRO
Flashes slowly.
*If there is no operation for about 30 seconds after the MACRO button is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you pressed the MACRO button is restored. If this occurs, press the MACRO button again.
2 Press a preset macro key on which you want to make a new macro.
CD | TRANSMIT |
| /LEARN |
Lights up.
*If a key other than a preset macro key is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.
3 Press a key whose function you want to store as the first function of the new macro.
SYSTEM
POWERTRANSMIT /LEARN
Goes off.
(When learning is finished, this indicator lights up again.)
*If a key whose function cannot be stored as a command of macro is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.
*If about 30 seconds pass before a key is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 1.
4 Repeat step 3 to store the second, the third and more functions. You can store up to seven key functions in series as a macro.
*If the seventh key function has been learned, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. (This shows that the key has completed learning a series of functions as a macro.) If this occurs, you do no have to follow the next step.
5 When you finish learning, press the MACRO button.
CLEAR LEARN MACRO
It is recommended to write down new key functions you stored on the provided user function stickers and paste them on the reverse side of the remote control transmitter or the reverse side of the remote control transmitter’s lid.
A
B
C
REMOTE CONTROL
TRANSMITTER
Memory back-up
All of the learned functions will be retained while you replace the batteries. However, if no batteries are installed for a few hours, the learned functions will be erased and will have to be learned again.
44
