Yamaha RX-V692 RX-V592 owner manual Specifications

SPECIFICATIONS

AUDIO SECTION

Minimum RMS Output Power per Channel Main L, R

8 ohms, 20 Hz to 20 kHz, 0.04% THD

<RX-V692>
[U.S.A. and Canada models]
..............................................	80W + 80W
[Australia, Singapore and
General models]	75W + 75W
<RX-V592>
[U.S.A. and Canada models]
..............................................	75W + 75W
[Australia, Singapore and
General models]	70W + 70W

Center

8 ohms, 20 Hz to 20 kHz, 0.07% THD

<RX-V692>
[U.S.A. and Canada models]	............80W
[Australia, Singapore and
General models]	75W
<RX-V592>
[U.S.A. and Canada models]	............75W
[Australia, Singapore and
General models]	70W
Rear
8 ohms, 1 kHz, 0.3% THD
<RX-V692>	40W + 40W
<RX-V592>	35W + 35W

Maximum Power [General model only] Main L, R (8 ohms, 1 kHz, 10% THD)

<RX-V692> ..........................120W+120W

<RX-V592> ..........................110W+110W

Dynamic Power per Channel

(by IHF Dynamic Headroom measuring method)

<RX-V692>

[U.S.A. and Canada models]

8/6/4/2 ohms ..............115/145/175/200W

[Australia, Singapore and General models]

8/6/4/2 ohms	..............100/125/150/175W
<RX-V592>
[U.S.A. and Canada models]
8/6/4/2 ohms	..............110/140/170/190W

[Australia, Singapore and General models]

8/6/4/2 ohms ................95/120/150/170W

Dynamic Headroom (8 ohms) [U.S.A. and Canada models only]

<RX-V692>		1.58 dB
<RX-V592>		1.66 dB
Power Band Width
<RX-V692>
8 ohms, 40W, 0.09% THD
<RX..........................................-V592>	10	Hz to 50 kHz
8 ohms, 30W, 0.09% THD
..........................................	10	Hz to 50 kHz
Damping Factor (SPEAKERS A)
8 ohms, 20 Hz to 20 kHz		80 or more

Input Sensitivity/Impedance

PHONO MM	2.5 mV/47 k-ohms
CD/TAPE/DVD·LD/TV·DBS/VCR
........................................	150 mV/47 k-ohms
6CH DISCRETE INPUT DVD/LD TV/DBS
<RX-V692>	150 mV/40 k-ohms
<RX-V592>	150 mV/50 k-ohms
Maximum Input Signal
PHONO MM
1 kHz, 0.04% THD	110 mV
CD/TAPE/DVD·LD/TV·DBS//VCR
(EFFECT ON)
1 kHz, 0.5% THD	2.2V
Output Level/Impedance
REC OUT	150 mV/2.5 k-ohms
PRE OUT (MAIN L/R)	2.2V/1.2 k-ohms
PRE OUT (REAR L/R)	1.6V/1.2 k-ohms
SUBWOOFER (EFFECT OFF)
............................................	6.0V/1.5 k-ohms

Headphone Jack Rated Output/Impedance

Output Level (8 ohms, 0.04% THD).......0.5V
Impedance	390 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TAPE/DVD·LD/TV·DBS//VCR
........................................................	0±0.5 dB
RIAA Equalization Deviation
PHONO MM	0±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT
1V	0.02%
CD/TAPE/DVD·LD/TV·DBS/VCRto SP OUT
<RX-V692>
40W/8 ohms	0.025%
<RX-V592>
30W/8 ohms	0.025%

Signal-to-Noise Ratio (IHF-A Network) PHONO MM to REC OUT

(5 mV Input Shorted) <RX-V692>

[U.S.A., Canada and General models]

........................................................86 dB

[Australia and Singapore models]

........................................................83 dB

<RX-V592>

[U.S.A., Canada and General models]

........................................................	85 dB
[Australia and Singapore models]
........................................................	82 dB
CD/TAPE/DVD·LD/TV·DBS/VCRto SP OUT
(Shorted)	98 dB
Residual Noise (IHF-A Network)
MAIN L/R	140 ∝V
Channel Separation
(Vol. –30 dB, EFFECT OFF)
PHONO MM
(Input Shorted, 1 kHz/10 kHz)
................................................	60 dB/50 dB
CD/TAPE/DVD·LD/TV·DBS/VCR
(Input 5.1 k-ohms Terminated,
1 kHz/10 kHz)	60 dB/45 dB

Tone Control Characteristics
BASS:	Boost/cut	±10 dB (50		Hz)
	Turnover Frequency		(350	Hz)
TREBLE:	Boost/cut	±10 dB (20 kHz)
	Turnover Frequency		(3.5 kHz)
Bass Extension		+6 dB (50		Hz)
Gain Tracking Error (0 to –60 dB)			3 dB

VIDEO SECTION

Video Signal Type
[U.S.A. and Canada models]			NTSC
[Australia and Singapore models]			..........PAL
[General model]			NTSC/PAL
Video Signal Level	1	Vp-p/75 ohms
S-Video Signal Level
Y	1	Vp-p/75 ohms
C	0.286	Vp-p/75 ohms
Maximum Input Level	1.5 Vp-p or more
<RX-V692 only>
S-Video C	0.5 Vp-p or more
Signal-to-Noise Ratio		50 dB or more

Monitor Out Frequency Response

..................................5 Hz to 10 MHz, –3 dB

FM SECTION Tuning Range

[U.S.A. and Canada models]

..........................................	87.5 to 107.9 MHz
[Australia, Singapore and
General models]	87.5 to 108.0 MHz

50 dB Quieting Sensitivity (IHF, 75 ohms) [U.S.A., Canada and General models only]

Mono	1.55 ∝V (15.1 dBf)
Stereo	21 ∝V (37.7 dBf)
Usable Sensitivity
DIN, Mono (S/N 26 dB)
[Australia and Singapore models]
...........................................................		0.9 ∝V
DIN, Stereo (S/N 46 dB)
[Australia and Singapore models]
............................................................		24 ∝V
Image Response Ratio
[U.S.A., Canada and General models]
..............................................................		45 dB
[Australia and Singapore models]
..............................................................		80 dB
IF Response Ratio
[U.S.A., Canada and General models]
.............................................................		70 dB
[Australia and Singapore models]		80 dB
Spurious Response Ratio		70 dB
AM Suppression Ratio		55 dB
Capture Ratio		1.5 dB

English

47