Yamaha RX-V692 RX-V592 Learning NEW Control Functions When the lid is open, To use these keys

LEARNING NEW CONTROL FUNCTIONS (When the lid is open)

This is a learning remote control transmitter. The shaded keys in the illustration shown below can be programmed to “learn” control functions from other remote control transmitters. By learning key-functions from other remote control transmitter, this unit can then be used in place of one or more other remote control transmitters, thus making operation of your various audio and video components more convenient.

Some of the “learning-capable” keys are originally empty and others have already been preset with functions to control this unit and other Yamaha components. You can store new functions to them (in place of preset functions) as desired.

*See page 43 for the learning method.

*See page 45 for clearing a learned function (or all learned functions).

Note

If the memory capacity of the remote control transmitter becomes full, no further learning is possible even if some learning-capable keys are not occupied with new functions. If, for example, you store Yamaha codes only into this remote control transmitter, up to about 20 functions can be stored. Store new functions to the learnable-capable keys which are useful for you.

		*1		(RX-V692)
				TRANSMIT
				/LEARN
	CLEAR	LEARN	MACRO
	REC/PAUSE		A/B
				TAPE
				A
1				CD
				TUNER	switch
	A	DIR	B	VCR
	STOP		DISC	B
				DVD/LD	A/B/C
2				TV/DBS
				C
3	PRESET	A/B/C/D/E			2
			70 mm
	PRO LOGIC	ENHANCED MOVIE THEATER
	1	2	3	V-AUX
	TV	STADIUM	DISCO
	SPORTS
4	4	5	6	PHONO
	ROCK	JAZZ CLUB	CHURCH
	7	8	9	EFFECT
	HALL	+10	TEST	ON/OFF
	0
	TIME/LEVEL
		DELAY
		CENTER
		REAR
		SWFR
	SLEEP	2CH/6CH
		SYSTEM		MASTER VOLUME
	TV	POWER
1				MUTE
	VCR
		OFF

REMOTE CONTROL

TRANSMITTER

Lid is open.

1

:These buttons are used for learning a new function

*or clearing a learned function (or all learned functions). See page 43–45 for details.

38

Keys which can have three functions (1, 2, 3, 4)

In the “Learning-capable” keys, the keys numbered1–4in the illustration at left can have three functions. This is because they have three memory areas (A, B and C). (One function per area.) You can store new functions into the area B and C, and use three functions on a key by switching the memory areas with the A/B/C switch. (Area A cannot learn a new function.)

To use these keys:

1.Before using a key, select the area A, B or C of the key on which the function you want to use is stored by using the A/B/C switch.

2.Press the key.

The original factory settings of these keys are as follows.

The position of A/B/C switch

A	B	C
Preset with	Empty	Empty

1functions for controlling a Yamaha tape deck.

Preset with	Empty	Preset with
functions for		functions for
2 controlling a		controlling a
Yamaha CD player.		Yamaha LD player.
(STOP is empty.)		(DISC is empty.)
Preset with	Empty	Empty
3 functions for
controlling
the built-in tuner.
Preset as the DSP	Preset as the DSP	Preset as the DSP
program selector	program selector	program selector
4 keys and the TEST	keys and the TEST	keys and the TEST
key. *2	key. *2	key. *2

2: “+10” is empty.

*For RX-V592, the functions on “9” and “0” are useless.

Note

The area A of all keys cannot learn new functions. To store new functions to these keys, store them onto the area B or C.

Empty keys (1, 2)

These are empty keys. Each key can learn a function from another remote control transmitter.

For example, the TV key is useful for storing the function of your TV’s power switch, and the VCR key can be used for your VCR’s power switch.