LEARNING A NEW FUNCTION
1 Place this remote control transmitter and the other remote control transmitter so that they face each other.
This remote control transmitter
Other remote control transmitter
/ F
About
English
5 Press and hold the key (on the other remote control transmitter) which has the function you want to store.
2
CLEAR LEARN MACRO
(Press by using the point of a mechanical pencil, etc.)
TRANSMIT
/LEARN
Flashes slowly.
*When learning is finished, the TRANSMIT/LEARN indicator stops lighting and then begins flashing slowly.
*If a signal is not successfully received, the TRANSMIT/LEARN indicator flashes rapidly and the mode prior to step 4 is restored. If this occurs, restart from step 4.
*If memory capacity is full, the TRANSMIT/LEARN indicator flashes rapidly to show you that learning is impossible, and then the mode before you began learning operations is restored.
*If there is no operation for about 30 seconds after the LEARN button is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.
3 If necessary, select the memory area by using the A/B/C switch on the side panel of the remote control transmitter.
4 Press the key on this remote control transmitter in which you will store a new function.
Lights up.
T
L
-
OF
*If a key which cannot learn another function is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.
*If there is no operation for about 30 seconds after a key is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is
restored. If this occurs, restart from step 2.
6 Repeat step
7 When you finish the learning operation, press the LEARN button.
CLEAR LEARN MACRO
Notes
●Newly learned functions will replace previously learned functions.
●If there is no more room in the memory area for a function to be learned, the TRANSMIT/LEARN indicator will flash rapidly. In this case, even if some keys are not occupied with functions from other remote control transmitters, no further learning is possible.
●If the lid is closed while learning and about 5 seconds pass, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 2. However, if the lid is opened within 5 seconds, the mode before the lid was closed is restored.
●There may occasionally be instances in which, due to the
43
