Yamaha RX-V750 ■Enjoying 2-channelsoftware

Notes

•Some 6.1-channel compatible discs do not have a signal (flag) which this unit can automatically detect. When playing these kinds of discs with 6.1-channel, select a decoder (PLIIx Movie, PLIIx Music, EX/ES or EX) manually.

•6.1-channel playback is not possible even if EX/ES is pressed in the following cases:

–When “SURR L/R SP” (see page 54) or “SURR B L/R SP” (see page 55) is set to NONE.

–When the source connected to the MULTI CH INPUT jack is being played.

–When the source being played does not contain surround left and right channel signals.

–When a Dolby Digital KARAOKE source is being played.

–When “2ch Stereo” or PURE DIRECT is selected.

•When the power of this unit is turned off, the input mode will be reset to AUTO.

•When the DTS-ES decoder is applied to DTS 96/24 signals, you cannot use the DTS 96/24 decoding feature.

•The Pro Logic IIx decoder is not available when “SURR B L/R SP” is set to NONE (see page 55).

•PLIIxMovie cannot be selected when “SURR B L/R SP” is set to SMLx1 or LRGx1 (see page 55).

PLAYBACK

■Enjoying 2-channel software

Signals input from 2-channel sources can also be played back on multiple channels.

Press q/DTS on the remote control to select the decoder.

/DTS

9

You can select from the following decoders depending on the type of software you are playing and your personal preference.

PRO LOGIC SUR. STANDARD

Standard processing for Dolby Surround sources.

PRO LOGIC SUR. ENHANCED

CINEMA DSP enhanced processing for Dolby Surround sources.

PRO LOGIC IIx Movie*

Dolby Pro Logic II/IIx processing for movie software.

PRO LOGIC IIx Music*

Dolby Pro Logic II/IIx processing for music software.

PRO LOGIC IIx Game*

Dolby Pro Logic II/IIx processing for game software.

DTS Neo:6 Cinema

DTS processing for movie software.

DTS Neo:6 Music

DTS processing for music software.

*Use the PLII/PLIIx parameter to select the Pro Logic II or Pro Logic IIx decoders (see page 78).

Note

The Pro Logic IIx decoder is not available when “SURR B L/R SP” is set to NONE (see page 55).

OPERATION	BASIC

English

35

Contents

Page IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) CAUTION: READ THIS BEFORE OPERATING YOUR UNIT We Want You Listening For A Lifetime CONTENTS FEATURES GETTING STARTED Supplied accessories Installing batteries in the remote control CONTROLS AND FUNCTIONS Front panel ■Europe model only Remote control Page Using the remote control Front panel display Page Rear panel SPEAKER SETUP Speaker placement Speaker connections Page ■FRONT terminals ■CENTER terminals ■SURROUND terminals ■SUBWOOFER jack ■ SURROUND BACK terminals CONNECTIONS Before connecting components Connecting video components ■Connecting to the MULTI CH INPUT jacks ■Connections for other video components ■VIDEO AUX jacks (on the front panel) Connecting audio components ■Connecting to an external amplifier Connecting the antennas Connecting the power supply cord ■IMPEDANCE SELECTOR switch Turning on the power AUTO SETUP Introduction Optimizer microphone setup Starting the setup ■If an error screen appears ■If a warning screen appears ■Troubleshooting for auto setup procedure PLAYBACK Page Selecting sound field programs ■Remote control operation ■Enjoying multi-channelsoftware ■Enjoying 2-channelsoftware ■Listening to high fidelity stereo sound (PURE DIRECT) ■Night listening modes Selecting input modes Displaying information about the input source TUNING Automatic and manual tuning Presetting stations ■Manually presetting stations Selecting preset stations Exchanging preset stations RECORDING SOUND FIELD PROGRAM DESCRIPTIONS For movie/video sources Page Page For music sources ADVANCED OPERATIONS Selecting the OSD mode Using the sleep timer Manually adjusting speaker levels Using the test tone SET MENU Using SET MENU 1 SOUND MENU Page Speaker level ■Speaker distance C)SP DISTANCE ■Center graphic equalizer D)CENTER GEQ ■Low-frequencyeffect level E)LFE LEVEL Dynamic range Audio set 2 INPUT MENU Input rename Input mode 3 OPTION MENU ■Parameter initialization C)PARAM. INI Zone set Speaker B set SP B ■Zone 2 setting E)ZONE2 SET REMOTE CONTROL FEATURES Control area Setting manufacturer codes Page Controlling other components Programming codes from other remote controls Changing source names in the display window Clearing function sets Clearing individual functions ZONE (U.S.A., CANADA AND AUSTRALIA MODELS ONLY) Zone 2 connections Remote controlling Zone ■Turning this unit to either on or standby ■Special considerations for DTS software EDITING SOUND FIELD PARAMETERS What is a sound field Changing parameter settings ■Resetting parameters to the factory presets SOUND FIELD PARAMETER DESCRIPTIONS ■LIVENESS ■S. INIT. DLY (Surround initial delay) ■S. ROOM SIZE (Surround room size) ■S. LIVENESS (Surround liveness) ■SB INIT. DLY (Surround back initial delay) ■REV.TIME (Reverberation time) ■REV.DELAY (Reverberation delay) ■REV. LEVEL (Reverberation level) ■DIALG.LIFT (Dialog lift) For 7ch Stereo ■CT LEVEL (Center level) ■SL LEVEL (Surround left level) ■SR LEVEL (Surround right level) TROUBLESHOOTING Page Page ■Tuner ■Remote control RESETTING THE FACTORY PRESETS GLOSSARY Audio formats Sound field programs Audio information Video signal information SPECIFICATIONS