Yamaha RX-V750 Input mode, Input rename

	SET MENU
For COAXIAL INPUT jacks 5 and 6	■ Input rename C)INPUT RENAME
Choices: CD, V-AUX, DTV/CBL, VCR 1, MD/CD-R,	Use this feature to change the name of the inputs on the
DVD, PHONO, DVR/VCR2	OSD and front panel display.

COAXIAL
IN

.
(5);;;;; CD

( CD )

(6);;;;; DVD

(

DVD

)

C)INPUT
RENAME

DVD
->

DVD

[<]/[>]:Position

[p
]/[p
]:Chara.

Notes

•You cannot select a specific item more than once for the same type of jack.

•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.

■Input mode B)INPUT MODE

Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 37 for details about the input mode). Choices: AUTO, LAST

B)INPUT
MODE

)AUTO

LAST

[<]/[>]:Select

[SELECT]:Return

•Select AUTO to allow this unit to automatically detect the type of input signal and select the appropriate input mode.

•Select LAST to set this unit to automatically select the last input mode used for that source.

Note

Even if LAST is selected, the last setting for the EX/ES button will not be recalled.

1Press an input selector button to select the input you want to change the name of.

2Press AMP.

3Press j / i to place the _ (under-bar) under the space or the character you want to edit.

4Press u/ dto select the character you want, then use j / i to move to the next space.

•You can use up to 8 characters for each input.

•Press d to change the character in the following order, or press u to go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, #, *, +, etc.

5Repeat steps 1 through 4 to rename each input.

6To exit, press SET MENU when finished.

OPERATION ADVANCED

English

59