Yamaha RX-V750 Clearing function sets

REMOTE CONTROL FEATURES

Clearing function sets

You can clear all changes made in each function set, such as learned functions, renamed source names and setup manufacturer codes.

1Press CLEAR by using a ballpoint pen or similar object.

CLEAR

y

Complete each of the following steps in 30 seconds. Other wise, the learning mode will be automatically canceled. In this case, press CLEAR again.

2Press u / d to select the clear mode.

L:DVD (L: name of a component)

Clears all learned functions in the respective component control area. Press an input selector button to select the component.

L:AMP Clears all learned functions for this unit’s control area.

L:ALL Clears all learned functions. RNAME Clears all renamed source names.

FCTRY Clears all remote functions and returns the remote to the factory settings.

3Press and hold CLEAR again for about 3 seconds.

“C:OK” appears in the display window.

4Press CLEAR to exit from the clearing mode.

Once you have cleared a learned function for a button, the button reverts to the factory preset setting.

CLEAR

Note

“ERROR” appears in the display window under the following circumstances:

–When a button other than the cursor is pressed.

–When more than one button is pressed at the same time.

CLEAR

Note

“C:NG” appears in the display window if the operation is unsuccessful. In this case, start over from step 2.

68

Contents

Page IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) CAUTION: READ THIS BEFORE OPERATING YOUR UNIT We Want You Listening For A Lifetime CONTENTS FEATURES GETTING STARTED Supplied accessories Installing batteries in the remote control CONTROLS AND FUNCTIONS Front panel ■Europe model only Remote control Page Using the remote control Front panel display Page Rear panel SPEAKER SETUP Speaker placement Speaker connections Page ■FRONT terminals ■CENTER terminals ■SURROUND terminals ■SUBWOOFER jack ■ SURROUND BACK terminals CONNECTIONS Before connecting components Connecting video components ■Connecting to the MULTI CH INPUT jacks ■Connections for other video components ■VIDEO AUX jacks (on the front panel) Connecting audio components ■Connecting to an external amplifier Connecting the antennas Connecting the power supply cord ■IMPEDANCE SELECTOR switch Turning on the power AUTO SETUP Introduction Optimizer microphone setup Starting the setup ■If an error screen appears ■If a warning screen appears ■Troubleshooting for auto setup procedure PLAYBACK Page Selecting sound field programs ■Remote control operation ■Enjoying multi-channelsoftware ■Enjoying 2-channelsoftware ■Listening to high fidelity stereo sound (PURE DIRECT) ■Night listening modes Selecting input modes Displaying information about the input source TUNING Automatic and manual tuning Presetting stations ■Manually presetting stations Selecting preset stations Exchanging preset stations RECORDING SOUND FIELD PROGRAM DESCRIPTIONS For movie/video sources Page Page For music sources ADVANCED OPERATIONS Selecting the OSD mode Using the sleep timer Manually adjusting speaker levels Using the test tone SET MENU Using SET MENU 1 SOUND MENU Page Speaker level ■Speaker distance C)SP DISTANCE ■Center graphic equalizer D)CENTER GEQ ■Low-frequencyeffect level E)LFE LEVEL Dynamic range Audio set 2 INPUT MENU Input rename Input mode 3 OPTION MENU ■Parameter initialization C)PARAM. INI Zone set Speaker B set SP B ■Zone 2 setting E)ZONE2 SET REMOTE CONTROL FEATURES Control area Setting manufacturer codes Page Controlling other components Programming codes from other remote controls Changing source names in the display window Clearing function sets Clearing individual functions ZONE (U.S.A., CANADA AND AUSTRALIA MODELS ONLY) Zone 2 connections Remote controlling Zone ■Turning this unit to either on or standby ■Special considerations for DTS software EDITING SOUND FIELD PARAMETERS What is a sound field Changing parameter settings ■Resetting parameters to the factory presets SOUND FIELD PARAMETER DESCRIPTIONS ■LIVENESS ■S. INIT. DLY (Surround initial delay) ■S. ROOM SIZE (Surround room size) ■S. LIVENESS (Surround liveness) ■SB INIT. DLY (Surround back initial delay) ■REV.TIME (Reverberation time) ■REV.DELAY (Reverberation delay) ■REV. LEVEL (Reverberation level) ■DIALG.LIFT (Dialog lift) For 7ch Stereo ■CT LEVEL (Center level) ■SL LEVEL (Surround left level) ■SR LEVEL (Surround right level) TROUBLESHOOTING Page Page ■Tuner ■Remote control RESETTING THE FACTORY PRESETS GLOSSARY Audio formats Sound field programs Audio information Video signal information SPECIFICATIONS