Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha RX-V750 Video signal information, ■S-Videosignal, ■Component video signal, ■Composite video signal

1 92

Download 92 pages, 3.4 Mb

Video signal information

■Component video signal

With the component video signal system, the video signal is separated into the Y signal for the luminance and the PB and PR signals for the chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the “color difference signal” because the luminance signal is subtracted from the color signal.

A monitor with component input jacks is required in order to use the component signal for output.

■Composite video signal

With the composite video signal system, the video signal is composed of three basic elements of a video picture; color, brightness and synchronization data. A composite video jack on a video component transmits these three elements combined.

■S-Video signal

With the S-Video signal system, the video signal normally transmitted using a pin cable is separated and transmitted as the Y signal for the luminance and the C signal for the chrominance through the S-Video cable. Using the S VIDEO jack eliminates video signal transmission loss and allows recording and playback of even more beautiful images.

GLOSSARY

	INFORMATION	ADDITIONAL


	English

87

Contents

Page IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) CAUTION: READ THIS BEFORE OPERATING YOUR UNIT We Want You Listening For A Lifetime CONTENTS FEATURES GETTING STARTED Supplied accessories Installing batteries in the remote control CONTROLS AND FUNCTIONS Front panel ■Europe model only Remote control Page Using the remote control Front panel display Page Rear panel SPEAKER SETUP Speaker placement Speaker connections Page ■FRONT terminals ■CENTER terminals ■SURROUND terminals ■SUBWOOFER jack ■ SURROUND BACK terminals CONNECTIONS Before connecting components Connecting video components ■Connecting to the MULTI CH INPUT jacks ■Connections for other video components ■VIDEO AUX jacks (on the front panel) Connecting audio components ■Connecting to an external amplifier Connecting the antennas Connecting the power supply cord ■IMPEDANCE SELECTOR switch Turning on the power AUTO SETUP Introduction Optimizer microphone setup Starting the setup ■If an error screen appears ■If a warning screen appears ■Troubleshooting for auto setup procedure PLAYBACK Page Selecting sound field programs ■Remote control operation ■Enjoying multi-channelsoftware ■Enjoying 2-channelsoftware ■Listening to high fidelity stereo sound (PURE DIRECT) ■Night listening modes Selecting input modes Displaying information about the input source TUNING Automatic and manual tuning Presetting stations ■Manually presetting stations Selecting preset stations Exchanging preset stations RECORDING SOUND FIELD PROGRAM DESCRIPTIONS For movie/video sources Page Page For music sources ADVANCED OPERATIONS Selecting the OSD mode Using the sleep timer Manually adjusting speaker levels Using the test tone SET MENU Using SET MENU 1 SOUND MENU Page Speaker level ■Speaker distance C)SP DISTANCE ■Center graphic equalizer D)CENTER GEQ ■Low-frequencyeffect level E)LFE LEVEL Dynamic range Audio set 2 INPUT MENU Input rename Input mode 3 OPTION MENU ■Parameter initialization C)PARAM. INI Zone set Speaker B set SP B ■Zone 2 setting E)ZONE2 SET REMOTE CONTROL FEATURES Control area Setting manufacturer codes Page Controlling other components Programming codes from other remote controls Changing source names in the display window Clearing function sets Clearing individual functions ZONE (U.S.A., CANADA AND AUSTRALIA MODELS ONLY) Zone 2 connections Remote controlling Zone ■Turning this unit to either on or standby ■Special considerations for DTS software EDITING SOUND FIELD PARAMETERS What is a sound field Changing parameter settings ■Resetting parameters to the factory presets SOUND FIELD PARAMETER DESCRIPTIONS ■LIVENESS ■S. INIT. DLY (Surround initial delay) ■S. ROOM SIZE (Surround room size) ■S. LIVENESS (Surround liveness) ■SB INIT. DLY (Surround back initial delay) ■REV.TIME (Reverberation time) ■REV.DELAY (Reverberation delay) ■REV. LEVEL (Reverberation level) ■DIALG.LIFT (Dialog lift) For 7ch Stereo ■CT LEVEL (Center level) ■SL LEVEL (Surround left level) ■SR LEVEL (Surround right level) TROUBLESHOOTING Page Page ■Tuner ■Remote control RESETTING THE FACTORY PRESETS GLOSSARY Audio formats Sound field programs Audio information Video signal information SPECIFICATIONS