
SET MENU
Dialog lift DIALG.LIFT
Use to turn on and off the DIALG.LIFT parameter (see page 78). This parameter adjusts the height of the front and center channel sounds (dialog, vocals, etc.) by assigning some of the front and center channel elements to the presence speakers.
Choices: OFF, ON
•Select OFF to turn off DIALG.LIFT effect.
•Select ON to turn on DIALG.LIFT effect.
Note
“DIALG.LIFT” appears only when “PRESENCE SP” is set to YES (see page 55).
■Presence/surround back channel selectH)PR/SB SELECT
You can select to prioritize either the surround back or presence speakers when playing sources that contain surround back channel signals using CINEMA DSP sound field programs.
Choices: PRch, SBch
H)PR/SBSELECT
PRch)SBch
[p]/[p]:Select
[SELECT]:Return
•Select PRch to use presence speakers even when surround back channel signals are input. The signals for the surround back channel will be output from surround speakers.
•Select SBch to use surround back speakers when a surround back channel signal is detected in a CINEMA DSP program. Presence channel signals will be output
from front speakers.
2 INPUT MENU
Use to reassign digital input/outputs, select the input mode or rename your inputs.
2INPUTMENU
.A)I/OASSIGNMENT
B)INPUTMODE
C)INPUTRENAME
[]/[]:Up/Down
[SELECT]:Enter
■Input/output assignment A)I/OASSIGNMENT
You can assign jacks according to the component to be used if this unit’s initial settings do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components. Once the inputs have been reassigned, you can select the corresponding component by using INPUT on the front panel or the input selector buttons on the remote control.
For COMPONENT VIDEO jacks A and B
Choices: DVD,
.[A];;;;;DVD
(DVD)
[B];;;;;DTV/CBL
(DTV/CBL)
For OPTICAL OUTPUT jack 1
Choices:
OPTICALOUT
For OPTICAL INPUT jacks 2, 3 and 4
Choices: CD, DTV/CBL, VCR 1, DVD, PHONO, DVR/ VCR2,
OPTICALIN
(3);;;;; DVD
(DVD )
(4);;;;;DTV/CBL
(DTV/CBL )
58