Yamaha RX-V750 ■Europe model only

A PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the OUTPUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

BSPEAKERS A/B

Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

CPRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING l / h (LEVEL –/+) between selecting preset station numbers and tuning.

DSTRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

EFM/AM

Switches the reception band between FM and AM.

FPROGRAM

Use to select sound field programs or adjust the bass/treble balance (in conjunction with TONE CONTROL).

GTONE CONTROL

Use to adjust the bass/treble balance for the front left and right, center, presence and subwoofer channels (see page 32).

HINPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this unit’s input jacks (see page 37).

IINPUT selector

Selects the input source you want to listen to or watch.

JMULTI CH INPUT

Selects the source connected to the MULTI CH INPUT jacks. When selected, the MULTI CH INPUT source takes priority over the source selected with INPUT (or the input selector buttons on the remote control).

KPURE DIRECT

Turns on or off PURE DIRECT mode (see page 36).

CONTROLS AND FUNCTIONS

■Europe model only

LRDS MODE/FREQ

Press this button when the unit is receiving an RDS station to cycle the display between the PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data services) and/or the frequency display.

MPTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode.

NPTY SEEK START

Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.

OEON

Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically.

INTRODUCTION

English

5

Contents

Page IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) CAUTION: READ THIS BEFORE OPERATING YOUR UNIT We Want You Listening For A Lifetime CONTENTS FEATURES GETTING STARTED Supplied accessories Installing batteries in the remote control CONTROLS AND FUNCTIONS Front panel ■Europe model only Remote control Page Using the remote control Front panel display Page Rear panel SPEAKER SETUP Speaker placement Speaker connections Page ■FRONT terminals ■CENTER terminals ■SURROUND terminals ■SUBWOOFER jack ■ SURROUND BACK terminals CONNECTIONS Before connecting components Connecting video components ■Connecting to the MULTI CH INPUT jacks ■Connections for other video components ■VIDEO AUX jacks (on the front panel) Connecting audio components ■Connecting to an external amplifier Connecting the antennas Connecting the power supply cord ■IMPEDANCE SELECTOR switch Turning on the power AUTO SETUP Introduction Optimizer microphone setup Starting the setup ■If an error screen appears ■If a warning screen appears ■Troubleshooting for auto setup procedure PLAYBACK Page Selecting sound field programs ■Remote control operation ■Enjoying multi-channelsoftware ■Enjoying 2-channelsoftware ■Listening to high fidelity stereo sound (PURE DIRECT) ■Night listening modes Selecting input modes Displaying information about the input source TUNING Automatic and manual tuning Presetting stations ■Manually presetting stations Selecting preset stations Exchanging preset stations RECORDING SOUND FIELD PROGRAM DESCRIPTIONS For movie/video sources Page Page For music sources ADVANCED OPERATIONS Selecting the OSD mode Using the sleep timer Manually adjusting speaker levels Using the test tone SET MENU Using SET MENU 1 SOUND MENU Page Speaker level ■Speaker distance C)SP DISTANCE ■Center graphic equalizer D)CENTER GEQ ■Low-frequencyeffect level E)LFE LEVEL Dynamic range Audio set 2 INPUT MENU Input rename Input mode 3 OPTION MENU ■Parameter initialization C)PARAM. INI Zone set Speaker B set SP B ■Zone 2 setting E)ZONE2 SET REMOTE CONTROL FEATURES Control area Setting manufacturer codes Page Controlling other components Programming codes from other remote controls Changing source names in the display window Clearing function sets Clearing individual functions ZONE (U.S.A., CANADA AND AUSTRALIA MODELS ONLY) Zone 2 connections Remote controlling Zone ■Turning this unit to either on or standby ■Special considerations for DTS software EDITING SOUND FIELD PARAMETERS What is a sound field Changing parameter settings ■Resetting parameters to the factory presets SOUND FIELD PARAMETER DESCRIPTIONS ■LIVENESS ■S. INIT. DLY (Surround initial delay) ■S. ROOM SIZE (Surround room size) ■S. LIVENESS (Surround liveness) ■SB INIT. DLY (Surround back initial delay) ■REV.TIME (Reverberation time) ■REV.DELAY (Reverberation delay) ■REV. LEVEL (Reverberation level) ■DIALG.LIFT (Dialog lift) For 7ch Stereo ■CT LEVEL (Center level) ■SL LEVEL (Surround left level) ■SR LEVEL (Surround right level) TROUBLESHOOTING Page Page ■Tuner ■Remote control RESETTING THE FACTORY PRESETS GLOSSARY Audio formats Sound field programs Audio information Video signal information SPECIFICATIONS