|
| Optimizing the speaker setting for your listening room |
|
|
|
9 Press Dl/ hrepeatedly to toggle between |
| 10 Press DENTER to return to the top |
the setup result displays. |
| “AUTO:RESULT” display. |
Press Dk/ nto toggle between the parameters in a |
|
|
results. |
| AUTO:RESULT |
Results of the speaker |
| RESULT |
connection and wiring |
| SP : 3/4/0.1 |
| DIST: 14.0/17.0ft | |
|
| LVL : |
|
| . >SET CANCEL |
|
| [ ]/[ ]:Up/Down |
|
| [ENTER]:Enter |
Results of the speaker distance from the listening position
Results of the setting of each speaker size
11Make sure the pointer is pointing at “SET” and “CANCEL” and then press Dl/ hto
select “SET” or “CANCEL”.
AUTO:RESULT
RESULT
SP : 3/4/0.1
DIST: 14.0/17.0ft
LVL :
.>SET CANCEL
[
]/[
]:Up/Down [ENTER]:Enter
PREPARATION
Results of the parametric equalizer of each speaker
Results of the speaker output level
y
If you are not satisfied with the results or want to manually adjust each parameter, use “MANUAL SETUP” (see page 69).
Notes
•The distances displayed in the “DISTANCE” results may be longer than the actual distance depending on the characteristics of your subwoofer.
•In the “EQ” results, different values may be set for the same frequency to provide finer adjustments.
Choices: SET, CANCEL
•Select “SET” to confirm the “AUTO SETUP” results.
•Select “CANCEL” to cancel the “AUTO SETUP” results.
12Press DENTER to confirm your selection.
The top “SET MENU” display appears in the OSD.
SET MENU
.;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[p]/[p]:Up/Down [ENTER]:Enter
13Press NSET MENU to exit from “SET MENU”.
14Disconnect the optimizer microphone from this unit.
The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.
y
If you change speakers, speaker positions, or the layout of your listening environment, run “AUTO SETUP” again to
recalibrate your system.
English