Before performing the following operations, set the operation mode selector on the remote control to KSOURCE.
Displaying the XM Satellite Radio information
You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display or in the OSD.
Note
If a status message or an error message appears in the front panel display or in the OSD, see the “XM Satellite Radio” section in “Troubleshooting” on page 97 for appropriate remedies.
■Displaying the XM Satellite Radio information in the front panel display
Press 7DISPLAY (or ODISPLAY) repeatedly to toggle between the following XM Satellite Radio information display modes.
Channel number / name
Channel category
Artist name / Song title
When the channel number / name is displayed:
[043] XMU
When the channel category is displayed:
<CAT>ROCK
When the artist name / song title is displayed:
Coldplay / Clo
XM Satellite Radio tuning
y
•The front panel display can indicate up to 14 alphanumeric characters at once. You can set whether to display the XM Satellite Radio information in the front panel display in a continuous manner or by 14 alphanumeric characters at once by using the “FL SCROLL” parameter in “OPTION MENU” (see page 82).
•If the XM Satellite Radio information contains a character that cannot be recognized by this unit, the character will be displayed with a space.
Note
If you press 7DISPLAY (or ODISPLAY) while the XM Satellite Radio information display is scrolling from right to left in the front panel display, the XM Satellite Radio information display mode toggles as described above.
■Displaying the XM Satellite Radio information in the OSD
Press 7DISPLAY (or ODISPLAY).
The following screen is displayed in the OSD.
XM INFORMATION
ALL CH SEARCH
XM :043
CHAN :XMU
CAT :Rock NAME :Coldplay TITLE:Speed of sound
.( Coldplay/Spe) [
]/[
]:CHANNEL [[]/[[]:CATEGORY
y
•To turn off the OSD, press 7DISPLAY (or ODISPLAY) again.
•You can select the amount of time the XM Satellite Radio information is displayed in the OSD by using the “OSD- SOURCE” parameter in “OPTION MENU” (see page 82).
•To hold the XM Satellite Radio information screen, press
DENTER on the remote control while it is being displayed in the OSD.
•The XM Satellite Radio information screen on hold is released if you press DENTER on the remote control again or if you
change the XM Satellite Radio channel.
•This unit can save up to two XM Satellite Radio information
screens for future reference. To view the previous two XM Satellite Radio information screens, press CTITLE on the
remote control repeatedly while the current XM Satellite Radio
information screen is hold.
OPERATION | BASIC |
|
|
English