■Speaker distance C)SP DISTANCE
Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time.
SOUND MENU
C)SP DISTANCE 1/2
.UNIT;;;;;;;;feet FRONT L;;;10.0ft FRONT R;;;10.0ft
CENTER;;;;10.0ft SWFR;;;;;;10.0ft
[p]/[p]:Up/Down [p]/[[]:Adjust
Unit UNIT
Choices: meters (m), feet (ft) Initial setting:
[U.S.A. and Canada models]: feet (ft)
[Other models]: meters (m)
•Select “meters” to adjust speaker distances in meters.
•Select “feet” to adjust speaker distances in feet.
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft) Initial setting:
FRONT L/FRONT R/CENTER/SWFR/SUR. L/SUR. R/ PRNS L/PRNS R: 3.00 m (10.0 ft)
SB L/SB R: 2.10 m (7.0 ft)
SP DISTANCE | Adjusted speaker |
FRONT L | Front left speaker |
|
|
FRONT R | Front right speaker |
|
|
CENTER | Center speaker |
|
|
SWFR | Subwoofer |
|
|
SUR. L | Surround left speaker |
|
|
SUR. R | Surround right speaker |
|
|
SB L | Surround back left speaker |
|
|
SB R | Surround back right speaker |
|
|
PRNS L | Presence left speaker |
|
|
PRNS R | Presence right speaker |
|
|
Notes
•The available speaker channels differ depending on the setting of the speakers.
•Instead of “SB L” and “SB R”, “SB” is displayed if “SUR.B L/
R SP” is set to either “SMLx1” or “LRGx1” (see page 73).
Customizing this unit (MANUAL SETUP)
■Equalizer D)EQUALIZER
Use this feature to select the parametric equalizer or the graphic equalizer.
Equalizer type select EQ TYPE SELECT
Use this feature to select the type of equalizer. Choices: AUTO PEQ, CENTER GEQ, EQ OFF
SOUND MENU
D)EQUALIZER
EQ TYPE SELECT
.CENTER GEQ
[p]/[p]:CT GEQ [p]/[[]:Select
• Select “AUTO PEQ” to use the parametric equalizer adjusted in “AUTO SETUP” (see page 28).
• Select “CENTER GEQ” to adjust the
• Select “EQ OFF” to deactivate the equalizing feature.
Note
When you carry out “AUTO SETUP” in advance (see page 28), “AUTO PEQ” is automatically selected as the default setting.
Test tone TEST
SOUND MENU
.TEST >OFF ON
100Hz ;;;;;; 0dB
300Hz ;;;;;; 0dB
1kHz ;;;;;; 0dB
3kHz | ;;;;;; | 0dB |
10kHz | ;;;;;; | 0dB |
[p]/[p]:Up/Down |
| |
[p]/[[]:Adjust |
|
Use this feature to make adjustments for “CENTER GEQ” while listening to a test tone.
Choices: OFF, ON
•Select “OFF” to stop test tones and output the currently selected source component.
•Select “ON” to output test tones from the center and
front left speakers.
OPERATION | ADVANCED |
|
|
English