Yamaha Silent Piano Setting the Amount of Reverb, Adjusting the Pitch Tuning, F2 Stage, C3-B3

Setting the Amount of Reverb

Reverb adds echo to the sound to give it more fullness and reverberation. Use the REVERB control to adjust the depth (the degree to which the reverb effect is applied to the sound). To turn the reverb off, set the control in the far left position.

You can also change the type of reverb to apply.

Reverb type	Effect	Setting method
Room	Reverberation similar to that heard in a normal	Hold down the A-1, A#-1, and B-1 keys and press C2.
	room
Hall 1	Reverberation similar to that heard in a small	Hold down the A-1, A#-1, and B-1 keys and press D2.
(Default setting)	concert hall
Hall 2	Reverberation similar to that heard in a large	Hold down the A-1, A#-1, and B-1 keys and press E2.
	concert hall
Stage	Reverberation similar to that heard on a stage	Hold down the A-1, A#-1, and B-1 keys and press F2.

The reverb type reverts to its default setting when you turn the power off.

A#-1

A-1 B-1	C2 (Room)	F2 (Stage)
	D2 (Hall 1)-default E2 (Hall 2)

Adjusting the Pitch (Tuning)

The pitch of this instrument is set so that A3=440Hz. You can fine tune the pitch up or down 65 cents in 1 cent steps (100 cents is equal to 1 semitone).

Operation	Setting method
Raise the pitch	Hold down the A-1 and B-1 keys and press any one of the keys between C3 and B3.
Lower the pitch	Hold down the A-1 and A#-1 keys and press any one of the keys between C3 and B3.
Return to default tuning	Hold down the A-1, A#-1, and B-1 keys and press any one of the keys between C3 and B3.

The pitch setting is stored when you turn the instrument off.

A#-1

A-1 B-1 C3–B3

English

7