20 SPX2000—Owner’s Manual
Level 1: Ut ility functions other than Operation Lock
will be disabled
Level 2: In addition to Level 1, effect store and undo-
ing of store operations will be disabled
Level 3: In addition to Level 2, effect recall and editing
will be disabled
The following table shows the operations that are dis-
abled for each level.
O: Operable X: Inoperable
*1 Only the Operation Lock level can be changed.
*2 If the Operation Lock level is 1 or higher, Utility functions
other than Operation Lock cannot be selected.
Here’s how to erase (clear) the recalled effect. You can only
erase USER bank effects.
You cannot erase the effects in the PRESET bank or CLAS-
SIC bank.
1Select the USER bank
Use the [BANK] button (A) to select the USER bank.
2Select an effect
Select the effect that you want to erase (page 12).
3Select the “U## CLEAR?” function
Press the [UTILITY] button (L) several times to select
“U## CLEAR?” (## will be an effect number).
4Erase the effect
Press the [▲ INC] button (G) to erase the recalled
effect.
→When the effect has been erased, the display will
indicate “Completed!”
NOTE: If you attempt to use the front panel buttons to perform
an operation that has been disabled by Operation Lock, a
message of “Operation Locked!” will appear in the display.
However, this message will not appear if such an operation is
attempted by remote control.
OPERATION LOCK
OFF
123
Button operations or equivalent remote control
[INPUT MODE] button (3)OOOX
[METER] button (4)OOOO
[BANK] button (A)OOOX
[STORE] button (B)OOXX
[▲]/[▼] buttons (C)OOOX
[RECALL] button (D)OOOX
[UNDO]
button (E)
Undo of Store opera-
tions OOXX
Undo of Recall opera-
tions OOOX
[BACK] button (F)/
[NEXT] button (H)OOOO
[▲ INC]/
[▼ DEC]
buttons (G)
Editing of Basic param-
eters and Fine parame-
ters
OOOX
Editing of Utility
settings OX*1 X*1 X*1
[PARAMETER] button (J)OOOO
[FINE PARAM] button (K)OOOO
[UTILITY] button (L)OO*2 O*2 O*2
[COMPARE] button (I)OOOX
[BYPASS] button (M)OOOX
[TAP] button (N)/foot switch OOOX
[POWER ON/OFF] button (P)OOOO
MIDI
Note on/off
(Start/stop recording or
playback for Freeze)
OOOO

Erasing an effect

NOTES:
•The effect will be erased when you press the [
▲
INC] button.
After the effect has been erased, you can use the [UNDO]
button (
E
) to recover the erased effect.
•If the display indicates “This Program is Protected!”, the pro-
tect setting has been turned on for that effect. Turn off the
protect setting, and then erase the effect (page 17).

U01 CLEAR?

PUSH INC