SPX2000—Owner’s Manual 23
Operation
You can transmit the SPX2000’s system settings, MIDI
program change tables, and effect data to another device.
This data will be transmitted from the port specified by the
“MIDI PORT GENERAL” setting (page 21).
1Select the “BULK OUT (ALL)” function
Press the [UTILITY] button (L) several times to select
“BULK OUT (ALL).”
2Start transmission
Press the [▲ INC] button (G) to start transmission.
While the data is being transmitted, the display will
indicate “Transmitting...”
When transmission is completed, the display will indi-
cate “Completed!” for approximately one second.
1Select the “TEMPO SOURCE” function
Press the [UTILITY] button (L) several times to select
“TEMPO SOURCE.”
2Select the tempo synchronization source
Use the [▲ INC]/[▼ DEC] buttons (G) to select the
tempo synchronization source.
You can select one of the following three sources for
tempo synchronization.
•TEMPO VALUE ONLY:
The TEMPO value specified using the [▲ INC]/[▼
DEC] buttons
•MIDI CLOCK:
MIDI Clock messages from the device connected to
the [MIDI IN] connector (T) or [TO HOST USB]
connector (U)
•TAP:
The TEMPO value specified using the [TAP] button
(
N
), [FOOT SW] jack (
O
), or [▲ INC]/[▼ DEC]
buttons
You can individually enable/disable reception for some
types of MIDI message. Reception can be enabled/disabled
for the following MIDI messages.
•NOTE ON/OFF (Note on/off )
•PGM CHANGE (Program change)
•CTL CHANGE (Control change)
•SYSEX BLKDMP (Bulk dump)
•SYSEX PRMCHG (Parameter change)
1Select the “MIDI RECEIVE” function
Press the [UTILITY] button (L) several times to select
“MIDI RECEIVE.”
2Select a type of MIDI message
Use the [BACK] button (F)/[NEXT] button (H) to
select the type of MIDI message for which you want to
enable/disable reception.
3Enable or disable MIDI message reception
Press the [▲ INC] button (G) to select ON (enable),
or press the [▼ DEC] button (G) to select OFF (dis-
able).
Transmitting SPX2000 data to another device
NOTE: The INPUT MODE and METER settings are not
included with the transmitted data.
Selecting the tempo synchroni-zation source
BULK OUT(ALL)
PUSH INC
TEMPO SOURCE
TAP
TEMPO SOURCE
TAP
Enabling/disabling MIDI mes-sage reception
MIDI RECEIVE
NOTE ON/OFF= ON
MIDI RECEIVE
NOTE ON/OFF= ON
MIDI RECEIVE
NOTE ON/OFF= ON