FM/AM tuning
•Select “PROGRAM SERVICE” to display the name of the Radio Data System program currently being received.
•Select “PROGRAM TYPE” to display the type of the Radio Data System program currently being received.
•Select “RADIO TEXT” to display the information on the Radio Data System program currently being received.
•Select “CLOCK TIME” to display the current time.
•Select “TRAFFIC ANNOUNCE” to display the traffic information. When you select this display mode, this unit searches the Radio Data System broadcasting station that provides the TRAFFIC ANNOUNCE Radio Data System service automatically.
Notes
•It may take a while for this unit to receive all of the Radio Data System data from the station.
•If the signals being received are not strong enough, this unit may not be able to utilize the Radio Data System data. In particular, the “RADIO TEXT” mode requires a large amount of data and may not be available even when the other Radio Data System display modes are available.
•In case of poor reception condition, press FM MODE on the front panel (or remote control) to select the monaural reception mode (see page 19).
•If the signal strength is weakened by external interference while this unit is receiving the Radio Data System data, the reception may be cut off unexpectedly.
•When the “RADIO TEXT” mode is selected, this unit can display the program information by a maximum of 128 alphanumeric characters, including the umlaut symbol. Unavailable characters are displayed with the “_” (underscore). The displayed information scrolls continuously.
