FM/AM tuning
■Manual station preset
Use this feature to store the desired FM and AM stations to the preset station memory manually.
1Tune into the desired FM/AM station.
See page 19 for tuning instructions.
2Press MEMORY on the front panel (or remote control).
The preset station number flashes in the front panel display for 5 seconds.
3Rotate PRESET/TUNING on the front panel (or press the numeric buttons on the
remote control) to select the desired preset station number while the preset station number flashes.
CH01 FM 99.80MHz
Preset station number
Note
Perform the next operation within 5 seconds after selecting the preset station number. If you do not press MEMORY within 5 seconds, the preset is canceled.
4Press MEMORY on the front panel (or remote control) again to confirm the preset.
Notes
•Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.
•The reception mode (stereo or monaural) is stored along with the station frequency.
■Clearing the preset station
1Select the desired preset station number.
Refer to “Tuning into the preset stations” on page 23 for details.
2Press CLEAR on the remote control.
The selected preset station number flashes in the front panel display.
CH01 FM 99.80MHz
Flashes
Note
Perform the next operation within 5 seconds after pressing CLEAR. If you do not press CLEAR within 5 seconds, the clearing is canceled.
3Press CLEAR to confirm.
“Preset 1 clear” appears in the front panel display.
