VL Version 2
35
4. New Features & Parameters
●
Freq.
¯0.057 … 40.0 Hz.
Sets the speed of modulation and therefore the rate of symphonic effect variation.
●
Depth
¯0 … 100%.
Sets the depth of modulation. Higher values produce deeper modulation and there-
fore a more pronounced symphonic effect.
●
Diffusion
¯0 … 10.
Diffusion determines the amount of stereo “spread”. The higher the value the
greater the spread. When set to “0” the symphonic effect is a centered monaural signal.
●
Lo-Fi
¯off, 1 … 12.
This parameter can be used to give the symphonic effect a more analog feel. Higher
values produce a smoother effect in the high-frequency range.
●
Wet/Dry Balance
¯0 … 100 %.
Sets the balance between the direct (“dry”) and effect (“wet”) sound. Higher values
produce a greater proportion of effect sound in relation to direct sound.
EDIT