VL Version 2
36
Celeste•Use the ¡ (“>”) and ™ (“<”) buttons to switch between the two pages
of effect parameters.
●
Element on/off — E1: & E2:
¯off, on.
In this parameter the cursor can be positioned at “E1:” or “E2:” to individually
turn the celeste effect on or off for elements 1 and 2, respectively. When “on” the output
of the corresponding element is fed to the input of the modulation stage, and when “off”
the modulation stage is bypassed. The “E2:” parameter will not appear when editing a
single-element voice.
●
Mode
¯Monaural, Stereo.
When set to “Stereo” the celeste effect is applied independently to the left and
right-channel signals. When “Monaural”, the celeste effect is applied to a mix of the
left and right-channel signals.
■ Monaural Mode Block Diagram
L In
R In
L Out
R Out
Celeste
Celeste
Wet/
dry
Wet/
dry
L In
R In
L Out
R Out
Celeste
Celeste
Wet/
dry
Wet/
dry
■ Stereo Mode Block Diagram