VL Version 2
41
4. New Features & Parameters
EDIT
●
Output Level
¯0 … 100 %.
Sets the output level of the distortion sound. Higher values produce higher level.
●
Mode
¯LPF, BPF, HPF.
Determines the type of filter used by the wah effect: LPF = Low Pass Filter; BPF =
Band Pass Filter; HPF = High Pass Filter.
●
Wah Pre/Post
¯Pre, Post.
Determines whether the wah effect is placed before the distortion effect (“Pre”) or
after the distortion effect (“Post”).
●
Cutoff Freq
¯26.9 Hz … 11.9 kHz.
Sets the central cutoff frequency for the wah effect.
●
Resonance
¯1.0 … 15.6.
Sets the amount of emphasis at the wah effect cutoff frequency, and therefore the
depth of the wah effect. Higher values produce greater emphasis at the cutoff frequency.
●
Sens
¯0 … 100 %.
Determines the amount of cutoff frequency variation or sweep. Higher values
produce a broader frequency variation. A setting of “0” results in no cutoff frequency
variation.