BASIC OPERATION

Basic playback operation

Once you have finished all cable connections and remote control operation, follow the procedure below to start basic

playback operation.

3 Start playback on the selected external

 

1

component.

For information on the external component, refer to

 

the instruction manual for the product.

2

4 Press VOLUME +/– to adjust the volume
level.

 

Press SUBWOOFER +/– to adjust the

 

subwoofer level.

 

y

 

• To turn off the volume temporarily, press MUTE. While

 

the mute function is activated, the VOLUME indicator

 

flashes. To resume the volume, press MUTE again or

 

press VOLUME +/–.

 

• When audio is output from both TV speaker and this unit,

 

mute the TV sound.

4

• The subwoofer volume can be adjusted separately from

the volume.

• You can also adjust the subwoofer volume listening to test tone. (☞ P. 19)

• Lowering the subwoofer volume is recommended at night.

You can operate the unit by the TV’s remote control when the HDMI control function is available. See the page 23 for details.

1 Press (Power).

This unit is turned on and the STATUS indicator lights green.

The input source and surround mode appear in the front panel display.

y

This unit has the auto-sleep function, which will automatically switch the unit to turn off if the unit is left turned on for 12 hours without any operation being performed.

2 Press one of the input buttons to select an input source.

After the input source name has been displayed in the front panel display for three seconds, the front panel display returns to its normal display. (Input source name: surround/stereo mode).

Note

When sound of HDMI is output from the TV, the volume level does not change if you press VOLUME +/– or MUTE of the remote control.

5 Select surround mode or stereo mode and set your sound preferences. (☞ P. 11)
Press (Power) again to set the unit to standby mode.

When the HDMI control function is set to on or the battery of iPod/iPhone is charged, the STATUS indicator lights red. When the HDMI control function is set to off, the STATUS indicator turns off. (☞ P. 3)

Listening with headphones

Insert a headphone plug to the PHONES jack (☞ P. 3) of this unit.

•The headphone volume, tone control can be set separately with speaker setting.

•You can enjoy surround and stereo sound using a

headphone same as the speaker. (☞ P. 11)

10 En