Adjusting the volume balance of each channelMenu: 1:SP LEVEL

Adjust the volume balance between the channels with test tones output from each channel.

Sub menu:

“1-1:FRONT L” “1-2:FRONT R”: Adjusts the output level of the front speaker (left/right) channels. “1-3:CENTER”: Adjusts the output level of the center speaker channel.

“1-4:SURROUND L” “1-5:SURROUND R”: Adjusts the output level of the virtual surround/surround speaker (left/ right) channels.

“1-6:SUBWOOFER”: Adjusts the output level of the subwoofer channel.

Adjustable range: –6 to +6 (Default setting: 0)

y

•You can also adjust the volume balance while playing the input device. (☞ P. 12)

•As you complete each channel setting, press LEVEL to move to the next channel for adjustment.

Adjusting high/low frequency sound (tone control)

Menu: 2:TONE CONTROL

You can adjust the balance of the high frequency range (Treble) and low frequency range (Bass) of sounds output from the front speakers to obtain desired tone. When headphones are connected, adjusts the balance of the high- frequency range and low-frequency range of sounds output from headphones.

Sub menu

“2-1:BASS”: Adjusts the balance of the low frequency range (Bass) of sounds output from the speaker. “2-2:TREBLE”: Adjusts the balance of the high frequency range (Treble) of sounds output from the speaker.

Adjustable range: –6 to +6 (Default setting: 0)

Configuring the HDMI settingsMenu: 3:HDMI SETUP

You can configure the settings related to HDMI signals and HDMI control function.

■Switching HDMI control function

on/off

Sub menu: 3-1:CONTROL

You can set whether to use the HDMI control function. For details, see “Operating the unit by TV’s remote control” (☞ P. 23).

Setup menu

Available options: OFF, ON (Default setting: OFF)

“OFF”: Deactivates the HDMI control function. The standby power consumption of this unit decreases. “ON”: Activates the HDMI control function.

y

To activate the ARC function, set “3-1:CONTROL” to “ON”.

■Setting the audio output

Sub menu: 3-2:AUDIO

You can select a component to play back HDMI audio signals. This setting is effective when “3-1:CONTROL” is set to “OFF”.

Available options: AMP, TV (Default setting: AMP)

“AMP”: Outputs HDMI sound signals from the speakers connected to this unit.

“TV”: Outputs HDMI sound signals from the speakers of a TV connected to this unit.

Changing the brightness of the front panel display

You can change the brightness of the front panel display. You can also turn off the front panel display to view a movie in a darker environment.

The brightness of the front panel changes as follows.

Menu: 4:DISPLAY MODEAdjustable range (Default setting: “DIMMER 0”)BrightDark

*Selecting DISPLAY OFF turns off the front panel display after exiting the setup menu.

Notes

•The front panel display lights up momentarily when any operation is performed with DISPLAY OFF mode selected.

•Only the STATUS indicator remains lit in DISPLAY OFF mode.

OPERATION

USEFUL

 

 

English

19 En