Setup menu
Using other speakersYou can set the speaker type if you want to add or change speakers. When you connect only the supplied speaker, you do not have to change the setting.
■Selecting the number of channels and the front speaker type
Sub menu:You can select the number of output speakers.
You can select the type of front speakers.
“BAR”: When you use the unit, either on its own or in addition to other commercially available speakers “BOOK SHELF”: This setting is not used for this system “OTHER”: When you connect commercially available speakers instead of the unit
Supplied speaker: | Commercially available speakers: |
|
| ||
| 3CH |
|
| |||
| 2CH | 4CH | 5CH | ||
(Default setting) | |||||
|
|
| |||
|
|
|
| ||
| BAR |
|
|
|
| |
(Default setting) |
|
|
|
| |
|
|
|
| *3 | |
| BOOK SHELF | *1 | *1 | *1, 3 | *1, 3 | |
| OTHER |
|
|
|
| |
| *1, 2 | *1, 2 | *1, 2, 3 | *1, 2, 3 | |
*1: | *2: |
| |||
*3: “8:MATRIX DECODE” settings available |
|
| |||
■Setting the distance between the speakers
Sub menu:Select a parameter suited for the distance between the front left and right speakers, to obtain the most suitable surround effect.
Available options (Default setting: NORMAL)“WIDE”: When the distance between the front speakers is over 150 cm
“NORMAL”: When the distance between the front speakers is from 80 cm
■Cutting the crossover register
Sub menu:You can set the cutoff frequency output from the
Notes
•When the surround mode is off, this setting cannot be made.
•This setting can be made only when “2CH” or “3CH” is selected in