Operating the unit by TV’s remote control

What is the HDMI control function?

You can use the TV remote control to operate this unit if your TV supports the HDMI control function (ex. REGZA Link) and is connected to this unit’s HDMI OUT (ARC) jack. *1

Remote control of TV (Example)Power on/offSwitches input

This unit automatically selects the input according to the input source setting on the TV. Switching input on TV menu (ex. selecting BD player on TV menu) also changes input of this unit.

Volume up/down Selects a component to reproduce sounds (this unit or TV)

*1 y

•Some TV supports switching the UniVolume function on/off except the above.

•Even if your TV supports the HDMI control function, some functions may not be available. For details, refer to the manual supplied with your TV.

•If you use HDMI to connect this unit to a device such as a BD player that supports HDMI control, you can control that device using the HDMI control function.

•We suggest that you use products (TV, BD/DVD player, etc.) from the same manufacturer.

(Power)

Input selector

Setting the HDMI control function

1 Turn on all components connected to this unit with HDMI.

2 Check all components connected with HDMI and enable the HDMI control function on each component.

For this unit, set “3-1:CONTROL” in the setup menu “3:HDMI SETUP” to “ON” (☞ P. 19). *2

For external components, refer to the manual supplied with each component. *3

3 Turn off the TV and then turn on it again.

*2 y

• The default setting is “OFF”.

When “3-1:CONTROL” in the “3:HDMI SETUP” is set to “ON” in setup menu,

–Even you press (Power) button, the power does not completely turned off and the signal outputs from the HDMI IN jack to HDMI OUT (ARC) jack.

–Before turning off the unit, select desired input sources connected to HDMI IN (1 to 3) jack.

–According to the TV, the TV operation such as changing the channel may change the setting of surround modes of this unit.

*3 y

The example of TV settings

•From a setup menu on your TV, select “Link setting” → “HDMI control setting” (example), then set a setting such as “HDMI control function” to “ON” (example).

•Setting such as “Speaker priority” should be set to “AV amplifier”.

OPERATION

USEFUL

 

 

English

23 En