PREPARATION

Placing

To enjoy quality sound thoroughly, place this unit in the appropriate positions, and install the components properly. The following illustrations are the setting images of this unit.

Notes

•Do not place this unit on/under any other components such as BD player in a pile. The vibration of this unit may cause system failure, etc. in other components.

•Keep enough ventilation space on the side, rear, and bottom side (that attached legs) of this unit. Do not place this unit on a thick carpet etc.

•Low frequency sound produced by the subwoofer integrated receiver may be heard differently depending on the listening position and subwoofer location. To enjoy desired sounds, try changing the location of the subwoofer integrated receiver.

•Depending on your installation environment, connections to external components can be done before installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure is best done first.

•When you clean this unit, use a clean, dry and soft cloth (such as a cloth for glasses).

•Do not press the speaker grille when moving it.

When placing the subwoofer integrated receiver in an upright position

Remove the stands and spacers on the bottom of the subwoofer integrated receiver and attach them to the side, as illustrated below.

Operation by the TV remote control is difficult (with the speaker beneath/under TV)

TV remote control operation may be difficult if the speaker hides the sensor of your TV when beneath or under the TV. Try the solutions below and see whether this solves the problem.

See the manual of your TV about where the sensor of your TV remote control is.

1Adjust the height of the speaker by using the stands.

Remove the screws that secure the stands of the speaker, and move the stands to adjust the height. Secure the stands by the same screws, as illustrated below.

2Use the TV remote signal receptor

The TV remote signal receptor (supplied) receives the signal of the TV remote control, and transmits to the TV remote control sensor. Place the TV remote signal receptor as shown below.

Signal receiver

1

Remove the two transparent Signalseals emitter

3

2

Attach the signal receptor

Position the signal

to the top of speaker

emitter to face the

 

center of TV remote

 

control sensor.
TV remote

 

control

 

sensor

 

Approx. 10 mm (3/8 in)
6 En