Yamaha YPP-100 4. PROGRAM CHANGE Data format: [CnH] -> [ppH], 5. SYSTEM REALTIME MESSAGES, 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format), Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... ->, 7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive), Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H]

YPP-100

• Panel Data Contents

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI

4. PROGRAM CHANGEData format: [CnH] -> [ppH]

CnH = Program event (n = channel number)

ppH = Program change number

5. SYSTEM REALTIME MESSAGES

[rrH]

F8H: Timing clock

FAH: Start

FCH: Stop

FEH: Active sensing

Data Transmission Reception

F8H Transmitted every Received as 96-clock tempo timing

96 clocks when MIDI clock is set to External

FAH Recorder start Recorder start

Not received when the MIDI clock

is set to Internal.

FCH Recorder stop Recorder stop

Not received when the MIDI clock

is set to Internal.

FEH Transmitted every If a signal is not received via MIDI

200 milliseconds for more than 400 milliseconds, the

same processing will take place for

All Sound Off, All Notes Off and

Reset All Controllers as when those

signals are received.

•Caution: If an error occurs during MIDI reception, the Damper, Sostenuto,

and Soft effects for all channels are turned off and an All Note Off occurs.

6. SYSTEM EXCLUSIVE MESSAGES(Yamaha MIDI Format)

Panel Data Transmit

Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... ->

[F7H]

F0H, 43H, 0nH, 7CH (n: channel number)

00H, 2AH (

data length

)

43H, 4CH, 20H, 20H (CL)

59H, 50H, 50H, 27H, 30H, 31H (YPP ’01)

30H, 30H (version x, y)

[PANEL DATA]

[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)

F7H

•When program change reception is turned OFF in the Function

mode, no program change data is transmitted or received.

Also, Bank MSB/LSB is not transmitted or received.

MSB LSB

P.C.#

PIANO 1 0 112 0

PIANO 2 0 112 1

E.PIANO 0 112 4

HARPSICHORD 0 112 6

VIBRAPHONE 0 112 11

CHURCH ORGAN 0 112 19

STRINGS 0 112 48

CHOIR 0 112 52

P.C.#=Program Change number

(1) 1'st Voice

(2) Dual On/Off

(3) Dual Voice

(4) Dual Balance

(5) Dual Detune

(6) Dual Voice1 Octave

(7) Dual Voice2 Octave

(8) Dual Voice1 Effect Depth

(9) Dual Voice2 Effect Depth

(10) –

(11) –

(12) –

(13) –

(14) –

(15) –

(16) –

(17) –

(18) –

(19) Reverb Type 1

(20) Reverb Type 2

(21) Reverb Depth1

(22) Reverb Depth2

(23) Effect Type 1

(24) Effect Type 2

(25) Effect Depth

(26) Touch Sensitivity

(27) Fixed Data

(28) Soft Pedal Function

(29) Absolute tempo low byte

(30) Absolute tempo high byte

• “–” indicates no affect.

• Panel data send requests cannot be received.

7. SYSTEM EXCLUSIVE MESSAGES(Universal System Exclusive)

(1) Universal Realtime Message

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->[llH] -> [mmH] -> [F7H]

MIDI Master Volume

•Simultaneously changes the volume of all channels.

•When a MIDI master volume message is received, the volume

only has affect on the MIDI receive channel, not the panel

master volume.

F0H = Exclusive status

7FH = Universal Realtime

7FH = ID of target device

04H = Sub-ID #1=Device Control Message

01H = Sub-ID #2=Master Volume

llH = Volume LSB

mmH = Volume MSB

F7H = End of Exclusive