Configuration (SETUP)
Once you have connected your DVD-Player you may now switch it on. If the video connection is correct you will see the Yamakawa startup picture.
Before you insert a DVD-movie or any other disc into the player you should complete the setup settings which are described on the following pages.
The basic settings of the DVD-Player are done in the SETUP. If you press the SETUP key you will see the main menu of the DVD-Player. Normally these settings only have to be made once before the first time you use the player in order to match your player to the TV set and the audio equipment. Later on during using your player changes in the SETUP are rather unlikely. To change in between the items AUDIO, VIDEO and OTHER, where various settings can be made use the
cursor keys.
When starting the SETUP you already are in the AUDIO menu. If you press SETUP again you will save you setting a leave the SETUP again.
AUDIO
In the AUDIO menu you may select two items with the cursor keys:
• | „OUTPUT“ | (Audio output) |
• | „DRC” | (Dynamic Range Control) |
12
