Yamakawa DVD-208, DVD-278, DVD-268 manual

4:3

TV screen

If you have a TV set with widescreen format 16:9 you should select „WIDE“. If you have a TV with 4:3 format you should choose the setting „4:3“, since the black bars during movies will disappear. If you choose the 4:3-setting „LB“ the well known black bars on top and bottom of the screen will appear but the picture is wider to the left and right. Factory setting is „4:3“.

TV System

If you have an older TV set it may not have multisync technology. In this case you have to choose „NTSC“. If you TV-set has multisync technology you can select „AUTO“ and your TV-Set will automatically match to the playback mode of your DVD-Player. By this you can watch PAL- and NTSC films (check the region code setting of your DVD-Player first) without making any other settings. Factory setting is „NTSC“.

Subtitle

Depending on the film it is possible to generally determine the subtitle definition. Subtitles will be always switched on after starting a film (then please choose „ON“) or will be always switched off (then please choose „OFF“). There are DVD movies that have their own menu system, whose subtitle definition will be overruling the setup definition of this player. The factory setting is „ON“. During play back of a DVD you can choose the available subtitles by pressing the subtitle

key	on your remote control.
	14