![](/images/new-backgrounds/1201692/20169227x1.webp)
Audio output
If you use the coaxial or optical digital output of your
choose the setting „PCM“. Also during the
setting „DOLBY“ analog signals will be sent out parallel to the digital signals. So therefore the speakers of your conventionally connected TV set will still be working. The factory setting is „DOLBY“.
DRC
Here you can set the Dynamic Range Control. This function will not allow loud noises in a film (f.e.
explosions) to exceed a certain value even if the noise in the film is supposed to be
louder. The factory setting is “ON”.
VIDEO
If you change to the item VIDEO in the setup the following settings can be made:
•TV screen
•TV system
•Subtitle
With the vertical cursor keys you can select the items to be changed and with the Play key you can select the value of this item by pressing as often as needed.
TV screen: | TV System: | Subtitle: |
4:3 | AUTO | ON |
LB | NTSC | OFF |
WIDE | PAL |
|
|
| 13 |