York DJ 180 warranty SOUND POWER RATING1, Capacity Ratings - Ari, Gas Heat Ratiings

261660-YTG-C-0707

TABLE 1: SOUND POWER RATING1

		ESP	BLOWER						SOUND POWER (db 10-12			Watts)
UNIT
	CFM						Octave Band Centerline Frequency (Hz)							SWL	dB(A)
SIZE
															@
		IWG	RPM	BHP	63	125		250	500	1,000	2,000	4,000	8,000	dB(A)
															10Ft.2
180	6,000	1.00	1,080	4.60	99	99		89	82	84	77	72	67	89	56
210/240	8,000	1.00	1,120	6.65	102	102		92	85	87	80	75	70	92	59
300	10,000	1.30	1160	12.5	108	108		98	91	93	86	81	76	98	65

1.These values have been accessed using a model of sound propagation from a point source into the hemispheric\free field. The dBA values provided are to be used for reference only. Calculation of dBA values cover matters of system design and the fan manufacture has no way of knowing the details of each system. This constitutes and expectation to any specification or guarantee requiring a dBA value or sound data in any other form than sound power level ratings.

2.At a distance of 10 feet from the blower.

TABLE 2: CAPACITY RATINGS - (ARI 360)1

MODEL	MBH	EER2	IPLV3
COOLING ONLY
DJ180C/E00	178	12.0	12.5
DJ210C/E00	208	11.7	12.7
DJ240C/E00	230	11.3	12.0
DJ300C/E00	292	10.5	11.2
COOLING WITH GAS HEAT
DJ180N/S	178	12.0	12.5
DJ210N/S	208	11.7	12.7
DJ240N/S	230	11.3	12.0
DJ300N/S	292	10.5	11.2
COOLING WITH ELECTRIC HEAT
DJ180E18	178	12.0	12.5
DJ180E36	178	12.0	12.5
DJ180E54	176	11.8	12.2
DJ180E72	176	11.8	12.2
DJ210E18	208	11.7	12.7
DJ210E36	208	11.7	12.7
DJ210E54	206	11.5	12.4
DJ210E72	206	11.5	12.4
DJ240E18	230	11.3	12.0
DJ240E36	230	11.3	12.0
DJ240E54	228	11.1	11.7
DJ240E72	228	11.1	11.7
DJ300E18	292	10.5	11.2
DJ300E36	292	10.5	11.2
DJ300E54	290	10.3	11.0
DJ300E72	290	10.3	11.0

1.Certified in accordance with the Unitary Large Equip- ment certification program which is based on ARI Stan- dard 340/360.

2.EER = Energy Efficiency Ratio at full load - the cooling capacity in Btu’s per hour (Btuh) divided by the power input in watts, expressed in Btuh per watt (Btuh/watt).

3.IPLV = Integrated Part Load Value.

TABLE 3: GAS HEAT RATIINGS

MODEL	MBH INPUT	MBH OUTPUT
DJ180N/S24	300	240
DJ180N/S32	400	320
DJ210N/S24	300	240
DJ210N/S32	400	320
DJ240N/S24	300	240
DJ240N/S32	400	320
DJ300N/S24	300	240
DJ300N/S32	400	320

NOTE: All gas units are two-stage heating. First stage is 50% of total.

S.S.E. = Steady State Efficiency (80%) - output divided by input.

For units with VFD and electric or gas heat, the speed of the indoor blower motor continues to be controlled by duct static pressure via the VAV control board.

If there are VAV boxes present in the duct sys- tem, the boxes must be driven to the full-open position using a customer-supplied power source to assure adequate airflow across elec- tric heating elements or gas heat exchanger tubes.

Unitary Products Group 9