OUTDOOR (CONDENSER) FAN ASSEMBLY

The outdoor fans shall be of the direct-driven propeller type, discharge air vertically, have aluminum blades riveted to cor- rosion resistant steel spider brackets and shall be dynami- cally balanced for smooth operation. The 4 outdoor fan motors shall be totally enclosed with permanently lubricated bearings, internally protected against overload conditions and staged independently.

REFRIGERANT COMPONENTS

Compressors:

a.Shall be Scroll compressors internally protected with internal high-pressure relief and over temperature protection.

b.Shall have internal spring isolation and sound muf- fling to minimize vibration and noise, and be exter- nally isolated on a dedicated, independent mounting.

Coils:

a.Evaporator and condenser coils shall have alumi- num plate fins mechanically bonded to seamless internally enhanced copper tubes with all joints brazed. Special Phenolic coating shall be available as a factory option.

b.Evaporator and Condenser coils shall be of the direct expansion, draw-thru, design.

Refrigerant Circuit and Refrigerant Safety Components shall include:

a.Balance-port thermostatic expansion valve with independent circuit feed system.

b.Filter drier/strainer to eliminate any moisture or for- eign matter.

c.Accessible service gage connections on both suc- tion and discharge lines to charge, evacuate, and measure refrigerant pressure during any necessary servicing or troubleshooting, without losing charge.

d.The refrigeration system shall provide at least 15° F of sub-cooling at design conditions.

e.All models shall have two independent circuits.

f.Hot gas bypass option shall be factory-installed on compressor #1 discharge line to provide cooling in low-load applications. HGBP shall be a standard feature on VAV models and an optional feature on CV models.

UNIT CONTROLS

a.Unit shall be complete with self-contained low-volt- age control circuit protected by a resetable circuit breaker on the 24-volt transformer side.

261660-YTG-C-0707

b.Unit shall incorporate a lockout circuit which pro- vides reset capability at the space thermostat or base unit, should any of the following standard safety devices trip and shut off compressor.

c.Loss-of-charge/Low-pressure switch.

1.High-pressure switch.

2.Freeze-protection thermostat, evaporator coil. If any of the above safety devices trip, a LED (light-emitting diode) indicator shall flash a diagnostic code that indicates which safety switch has tripped.

d.Unit shall incorporate "AUTO RESET" compressor over temperature, over current protection.

e.Unit shall operate with conventional thermostat designs and have a low voltage terminal strip for easy hook-up.

f.Unit control board shall have on-board diagnostics and fault code display.

g.Standard controls shall include anti-short cycle and low voltage protection, and permit cooling operation down to 0 °F.

h.Control board shall monitor each refrigerant safety switch independently.

i.Control board shall retain last 5 fault codes in non volatile memory, which will not be lost in the event of a power loss.

GAS HEATING SECTION (DJ***N MODELS)

Shall be designed with induced draft combustion with post purge logic and energy saving direct spark ignition, redun- dant main gas valve. Ventor wheel shall be constructed of stainless steel for corrosion resistance. The heat exchanger shall be of the tubular type, constructed of T1-40 aluminized steel for corrosion resistance and allowing minimum mixed air entering temperature of 25° F. Burners shall be of the in- shot type, constructed of aluminum coated steel and contain air mixture adjustments. All gas piping shall enter the unit cabinet at a single location through either the side or curb, without any field modifications. An integrated control board shall provide timed control of evaporator fan functioning and burner ignition. Heating section shall be provided with the fol- lowing minimum protection:

a. Primary and auxiliary high-temperature limit switches.

b.Induced draft motor speed sensor.

c.Flame roll out switch (automatic reset).

d.Flame proving controls. Unit shall have two inde- pendent stages of capacity.

38

Unitary Products Group

Page 37 Page 39
Page 38
Image 38
York DJ 180 warranty Outdoor Condenser FAN Assembly
Page 37 Page 39

DJ 180 specifications

York DJ 180 is a cutting-edge DJ controller that has made a significant impact on the electronic music scene, particularly among novice and professional DJs alike. Designed to offer a seamless mixing experience, it combines innovative technology and user-friendly features, making it a go-to choice for anyone looking to elevate their DJ skills.

One of the standout features of the York DJ 180 is its intuitive layout, which includes two robust jog wheels that offer excellent precision and responsiveness. These jog wheels are not only sensitive to touch but also offer adjustable resistance, allowing DJs to customize their setup according to their mixing style. The controller's large play/pause and cue buttons are positioned strategically for quick access, ensuring smooth transitions between tracks.

The DJ 180 also boasts a comprehensive array of controls, including eight backlit performance pads per deck. These pads allow users to trigger samples, loops, and effects effortlessly, enabling enhanced creativity on the fly. Additionally, the controller features dedicated EQ knobs and a built-in sound card, which allows for easy connection to external devices and enhanced audio quality.

Incorporating advanced technology, the York DJ 180 supports both USB and MIDI connections, ensuring compatibility with a wide range of software and hardware setups. Whether mixing with popular DJ software or using it as a standalone controller for live performances, this flexibility makes it an essential tool for any DJ.

Another notable characteristic of the York DJ 180 is its portability. Weighing in at just under six pounds and featuring a slim profile, it is designed for DJs on the move, making it easy to transport to gigs and events without compromising on functionality.

Furthermore, the controller includes built-in effects, such as delay, reverb, and flanger, allowing DJs to add unique touches to their sets without needing external equipment. This streamlined approach makes the York DJ 180 not just a controller but a complete performance solution.

In conclusion, the York DJ 180 is a technologically advanced DJ controller that balances portability and performance with user-friendly features. Whether you are just starting your DJ journey or are an experienced professional, the versatility and quality of the York DJ 180 make it an excellent choice for all music enthusiasts.
Top Page Image Contents