•PROPANE CONVERSION KIT - Contains new orifices and gas valve parts to convert from natural to L.P. gas. One per unit required.
•HIGH ALTITUDE - NATURAL GAS - Contains orifices required for applications between 2000 and 6000 feet altitude.
•HIGH ALTITUDE - PROPANE GAS - Contains orifices required for applications between 2000 and 6000 feet altitude. Must be used with propane conversion kit.
•BURGLAR BARS - Designed to work with above roof curbs, depending on unit model. Fits duct openings of curb supply and return air openings.
•SIDE DUCT FLANGE - Supply and return air duct flanges for side duct applications. Do not use on units with power exhaust.
•HIGH STATIC DRIVE - Includes blower pulley and belt for higher CFM and/or static pressure requirements.
•WOOD SKID - Allows unit to be handled with 90" forks.
•ECONOMIZER/MOTORIZED DAMPER RAIN HOOD (DJN/E/C300 only) - Contains all hood panels and the hardware for assembling.
•
•LOW AMBIENT KIT - Provides unit cooling operation down to 0°F.
•COIL GUARD KIT - Guard for cooling coil.
OTHER FACTORY INSTALLED OPTIONS
•POWER EXHAUST OPTION - To work in conjunction with economizers.
•STAINLESS STEEL HEAT EXCHANGER
•STAINLESS STEEL DRAIN PAN
•TECHNICOAT PHENOLIC COATED CONDENSER AND EVAPORATOR COIL
•ELECTRONIC SINGLE ENTHALPY ECONOMIZER
•DIRTY FILTER SWITCH
•DOUBLE WALL
•PHASE MONITOR
•COIL GUARD
•POWERED GFI CONVENIENCE OUTLET
•
•BAS CONTROLS (Simplicity®
JOHNSON, HONEYWELL, NOVAR)
•BAS READY ECONOMIZER (
•HINGED FILTER DOOR ACCESS AND TOOL FREE ACCESS PANELS
•HINGED TOOL FREE BLOWER, BLOWER MOTOR, FILTER AND ELECTRICAL ACCESS PANELS
•HIGH STATIC DRIVE
•2" PLEATED FILTERS
•4" THROW AWAY FILTERS
•DISCONNECT SWITCH
•SUPPLY AIR SMOKE DETECTOR
•RETURN AIR SMOKE DETECTOR
Subject to change without notice. Printed in U.S.A. |
| |
Copyright © 2007 by Unitary Products Group. All rights reserved. | Supersedes: | |
|
|
|
Unitary | 5005 | Norman |
Products | York | OK |
Group | Drive | 73069 |