York E*BD-F018 THRU 060 warranty Description, Warranty, Features, Technical Guide, Listed

TECHNICAL

GUIDE

SPLIT-SYSTEM HEAT PUMPS

13 SEER – R-22

MODELS: E*BD-F018 THRU 060

(1.5 THRU 5 NOMINAL TONS, 1 PHASE)

E*BD-(T,W)036 THRU 060

(2.5 THRU 5 NOMINAL TONS, 3 PHASE)

ISO 9001

Certified Quality

Management System

LISTED

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com

Additional rating information can be found at www.ahridirectory.org

246819-BTG-H-0208

DESCRIPTION

The 13 SEER series heat pumps are designed for use with a variety of UPG evaporator sections to suit any application need. A full line of matching Add-On Coils are available for use with upflow, downflow or horizontal furnaces. Matching Air Handlers are also available for upflow, downflow or hori- zontal installation to provide a complete system. Electric heat may be installed in air handlers. All units are factory charged to assure easy installation.

WARRANTY

Single Phase Units:

5-year limited parts warranty.5-year limited compressor warranty.

Three Phase Units:

1-year limited parts warranty.

5-year limited compressor warranty.

FEATURES

•DURABLE CONSTRUCTION - The outdoor unit is con- structed of pre-painted steel that offers tough protection against corrosion and resists fading when exposed to sun- light. Drain holes are incorporated into the base pan to per- mit free drainage of moisture.

•QUALITY COILS - The coil is constructed of enhanced copper tube and aluminum fins.

•COIL PROTECTION - Coils are protected from damage by a polymer mesh applied between the coil face, and a PVC coated steel coil guard.

•PROTECTED COMPRESSOR - The hermetic compressor is internally protected against high pressure and tempera- ture by the simultaneous operation of a high pressure relief valve and temperature sensors which stop the compressor if operating temperatures go too high. Both protectors reset automatically. A discharge line solid core filter drier further protects the compressor.

•Complete System Control – These heat pumps utilize the unique microprocessor defrost control system to pro- vide optimal comfort and to monitor the overall system for reliable operation. The defrost control system continuously monitors the space environment to maintain optimum effi- ciency. It initiates defrost only when necessary to further reduce heating costs and improve reliability. In the event improper operating conditions occur, the control will auto- matically shut the system down to extend the life of the heat pump. Rapid cycling is prevented by use of an inter- nal anti-recycle timer.

•LOW OPERATING SOUND LEVEL - The compressor is mounted on rubber isolators to reduce operating sounds. The slow moving condenser fan keeps air turbulence and sound to a low level.

•EASY ACCESS - Removable panel affords accessibility to the electrical box.

•FULLY CHARGED AND FACTORY WIRED - to simply installation and reduce labor costs. Only power supply and control wiring and refrigerant lines must be connected. All models are sweat connect with reusable service valves.

•Factory tested - to verify system operation and control functioning before shipment.

•U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment cer- tification program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE