INSTALLATION

STEP 2: 8X RAID INSTALLATION

CAUTION: When attaching the inner members of the slide assemblies to the sides of the 8X RAID, ensure screw penetration does not exceed 3/16” length. Damage may result if screw length exceeds 3/16” length. Use 10-32 x 3/16” screws only (part# 01-91827).

Hold the 8X RAID up to the extended rails with the rear of the 8X RAID to the rear of the rack. Insert the inner member (attached to the 8X RAID) into the middle member of the slide.

Slide the unit in until the slide action stops.

Simultaneously press the slide locking tab in and push the unit all the way back into the rack.

Secure the front of the 8X RAID to the rack with three 8-32 x .75” panhead Phillips screws on each side. See image above.

11

Doc# 27-0030UM Rev 1.0 Issued 12/04