INSTALLATION

STEP 1: RAIL INSTALLATION

The 8X RAID will arrive with the slides unattached.

Slide Extension Bracket

Outer Slide Member

To attach the slides to the extension brackets, use two panhead phillips screws (part# 01-91622), two fl at washers (01- 91872), and two lock washers (01-92151).

Insert the screws through the slots of the extension bracket and into the holes in the outer slide member. Secure loosely with fl at and lock washers. Do not tighten. Repeat with the second slide assembly.

Positioning the slide assembly on the inside of the rack, secure the front of the slide assembly to the front of the rack using a fl at Phillips head screw (part #01-92087) in the top position.

Secure the rear of the slide assembly to the rear of the rack using two panhead Phillips head screws (part #01-91622).

Tighten the slide assembly screws using a Phillips screwdriver and 3/8” ratchet. Repeat rail installation for other side.

9

Doc# 27-0030UM Rev 1.0 Issued 12/04