MAINTENANCE
REPLACING THE FAN ASSEMBLY
With your fi ngers, turn the two thumbscrews (locations shown above) counter clockwise until the screws loosen.
Rotate the fan assembly upward on the hinge and then down.
Lift the fan assembly away from the Tranz- Stor 8X chassis.
To install the new fan assembly, place the two hinges into the hinge slots (shown in the next photo) at a 45 degree angle.
The image above shows a hinge being inserted into the hinge slot.
Seat the assembly down and secure it in place by simultaneously pressing and turning the thumbscrews clockwise. Tighten the thumbscrews.
27
Doc#