OPERATIONS
INSERTING THE TP7
With the handle in the open position, hold the TranzPak 7 by the main body and insert it partially into the docking bay. ( Be sure that it is sliding on the black guides).
Check that the locking catch is aligned with the locking indent in the slide rail and press the handle towards body...
Using your thumb push the TranzPak 7 gently into the bay until you can feel it touching off on the rear connector.
until it snaps the locking handle in place. Check that all TranzPak 7 disk modules are aligned across the face of the 8X.
22
Doc#