APPENDIX

properly position itself if an uncommon image stream is provided to the display.

Argument

No arguments.

PBB

Description

PBB adjusts the blue balance of the main images RGB setting.

Argument

The allowable range is 0-255 base10. The factory default is 128.

PBG

Description

PBG adjusts the green balance of the main images RGB setting.

Argument

The allowable range is 0-255 base10. The factory default is 128.

PBR

Description

PBR adjusts the red balance of the main images RGB setting. On certain displays, a low brightness setting can cause the backlight to fade to black before reaching “0”.

Argument

The allowable range is 0-255 base10. The factory default is 128.

PCH

Description

PCH selects the channel that the controller should check for input. There are two channels through which that input can be provided—channels A and B. The unit can also be placed in auto detect mode. The unit does not allow itself to be placed on a dead channel after it has acquired a signal. If the controller has a good signal coming in on channel A and the controller is told to listen to channel B and channel B has no signal the controller will switch back to channel A.

Argument

For Auto mode 66, channel A 88, channel B 99 all base10. Default is Auto mode.

Return

The channel being listened to is returned in the following syntax:

=<mode>~~~

where “mode” = {66,88,99}

50

Doc# 27-0027UM Rev 1.0 Issued 10/04