INSTALLATION

The display protective lens is intended to protect the surface of the screen from damage while in transit or during storage. The protective lens is not intended to be used while the StarGate is in operation, but can be used to protect the display if desired.

Make sure the StarGate is in the closed position.

Move the protective lens release catch (located above the display) up.

While holding up the release catch, slide the protective lens to the left or right.

Slide the protective lens off the edge of the display.

To reinstall the display protector during long storage or shipping, just reverse this process.

9

Doc# 27-0027UM Rev 1.0 Issued 10/04