
INSTALLATION
HARDWARE INSTALLATION
The StarGate is a fl at LCD that mounts on the front of the RETMA rails of a standard 19” rack.
The dual locks can be seen on the vertical handle to the left. The display controls are located on the bottom below the display.
The StarGate display swings out to the right. The bracket that mounts to the front of the RETMA rails is on the left.
On the top and bottom of the mounting bracket is the receptacle for securing the display fl at against the rack.
On the center left side of the back is the receptacle for the power plug for the cord that leads from the power supply to the dis- play, as well as the video connector and host serial connector.
Using both hands, press and slide the lock releases inside the handle on the left side of the display towards each other to release the locks and allow you to swing open the StarGate.
7
Doc#