For best results we recommend you to use the cutlery grids provided (if the size and dimensions of the cutlery allow it).
The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart.
To reassemble, reverse the procedure.
UI63 |
UI62 |
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
|
| Maximum height of the dishes in | ||
|
| upper basket | lower basket | |
|
|
|
|
|
|
|
|
|
|
With upper basket raised | 20 cm |
| 31 cm |
|
|
|
|
|
|
With upper basket lowered | 25 cm |
| 27 cm |
|
|
|
|
|
|
To move to the higher position proceed as follows:
1.Move the front runner stops (A) of the upper basket outwards and slide the basket out.
2.Refit the basket in the higher position and replace the stops
(A)in their original position.
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water can reach all surfaces.
Glasses with long stems can be placed upside down in the cup racks.
Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move.
US46 |
After loading your machine always close the door, as an open door can be a hazard.
In case that plates are loaded in the upper basket:
load them starting from the rear positions of the basket; tilting them slightly forwards and avoiding the front positions near the door.
US71
Before closing the door, ensure that the spray arms can rotate freely.
9
