Automax

AUTOMAX supplies the zone with full heat for a specific period, and then adjusts down to the setting you have chosen.

λTurn the control button clockwise to “A”, then select the required setting.

The display alternates between A and the setting chosen. The period for which AUTOMAX is connected depends on the setting chosen.

Connection of child safety device on zones

λTurn the 2 single zone-control buttons anticlockwise to “S” at the same time.

0

S

0

0

S

 

 

 

 

A

A

 

A

FO 2528

 

 

 

 

The display will show:

FO 2530

When you turn on a zone the display will show:

FO 2530

You can disconnect the child safety device as follows:

λTurn all the cooking zone control buttons to 0.

λTurn the 2 single zone-control buttons anticlockwise to “S” at the same time.

The light under the “key” symbol in the display will disappear. The zones can now be used.

CHEC control: Autostop

If you forget to turn a cooking zone off after use, it will be disconnected automatically after a specific period of time. The higher the setting, the shorter the time before the zone is disconnected.

Setting AUTOSTOP

16 hours

26 hours

35 hours

45 hours

54 hours

61½ hours

71½ hours

81½ hours

91½ hours

When the autostop function is activated the display will show:

FO 2527

The zones cannot be used.

To activate the cooking zones:

λTurn all the control buttons to 0. The zones can now be used.

Residual heat indicator

When you switch off a zone, an “H” in the display indicates that the zone is still hot. The residual heat indicator will continue to be illuminated until the zone reaches a temperature of approx. 50°C.

FO 2526

7

Page 7
Image 7
Zanussi ZCE 700 manual Automax, Connection of child safety device on zones, Chec control Autostop, Residual heat indicator