GAS CONNECTIONS
Your cooker is delivered adjusted for the kind of gas stated on the rating plate
If the appliance is supplied with natural gas and the pressure for natural gas is 20mbar. The following method of connection to the gas supply must be used:
Rigid Connection
Where it is not possible to make the connection using a rubber hose, a rigid pipe work connection must be used.
Recommendations when using an appliance flexible connector are as follows:
-For NATURAL the gas installation pipes to the termination point shall comply with:
Specification for installation of
Connection shall be by means of an appliance flexible connector for use with a
Flexible hoses, end fittings and sockets for gas burning appliances – BS 669;
The appliance flexible connector should not be subjected to undue forces either in normal use or whilst connected or disconnected;
-The socket which the plug of the appliance flexible connector fits should be permanently attached to a firmly fixed gas installation pipe and positioned such that the appliance flexible connector hose hangs freely downwards.
-The appliance flexible connector should be positioned such that it will not suffer mechanical damage, e.g. abrasion from the surrounding kitchen furniture, which may be moved in use such as a drawer or door, or by being trapped by any stability device.
The bayonet connector should be accessible for disconnection after moving the appliance.
27
