If the cooker is not equipped with thermocouples on the burners, insert a small slotted screwdriver into the hole on the tap shaft and turn the screw to the right or left until the burner flame is adjusted to minimum.
If the cooker is equipped with thermocouples, the screw is not located in the tap shaft, but on the valve body.
Reassemble the parts following the same procedure in reverse.
Check that, when turning the knob quickly from the maximum position to the minimum one, the flame does not go out.
AFTER COMPLETION OF ANY REPAIRS,
ADJUSTMENTS OR CONVERSION THE STATUTORY SAFETY TESTS MUST BE CARRIED OUT.
Stick the label supplied with the appliance (in the nozzles bag) onto the rating plate in accordance with the gas type utilised.
The grill burner always operates at maximum and therefore no minimum adjustment is necessary.
29
