Zanussi ZCV662 user manual Environment concerns, Electrical installation, Covering terminal board

1

60 mm

50 mm

A

2

B

Electrical installation

Warning! Only a qualified and competent person must do the electrical installation.

The manufacturer is not responsible if you do not follow safety precautions from the chapter "Safety

information".

This appliance is supplied without a main plug or a main cable.

Covering terminal board

The recommended cross-section area is six square milli- metres (6 mm²).

When you refit the mains terminal cover, make sure that the lower tabs are located inside the bottom edge of the aperture, before you fix the two screws into the top edge of the mains terminal cover.

Make sure that the cover is securely fastened.

To open the cover of terminal board obey the proce- dure in opposite sequence.

Terminal board

Make sure that the links are fitted as shown.

L L N N N

Do not remove blanking plates.

Environment concerns

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact

your local council, your household waste disposal service or the shop where you purchased the product.

Warning! Refer to "Safety information" chapter.

Packaging material

The packaging material is environmentally-friendly and recyclable. Plastic parts are marked with international abbreviations such as PE, PS, etc. Dispose of the packag- ing material in the containers provided for this purpose at your local waste management facility.

19